>> Important Information <<

If users still ignore our forum rules and post again portal`s by name and url`s, the thread will be closed, postings deleted and user/s banned.
This is not a support forum for provider/portal related issues! Pleas follow the forum rules.

Thank you for your understanding.
  • Hallo, in the list of addon Mcas app does not exist anymore? I remove from formuler 4s to try reinstall it becouse it not work with new software version.

    Where I can found the app?

    Thank!

    Rob

  • Download and install XCam3 from the plugin menu.

    Smartcard is controlled from XCam3 now.



    Unsolicited PMs for support will be ignored.

    Duplicate support requests to the forums and helpdesk will be ignored.

  • I've tried to install Xcam3, but the smartcard don't work. The card is a Nagravision Italian TvSat and with Mcas app worked fine (directly in the formuler cas slot, not through CI).

  • Unzip the attached file and use your PC (SMB) to copy the file to


    \\STB_IP\share\plugin\oscam\


    Then try again please

    Dateien

    • oscam.zip

      (284 Byte, 18 Mal heruntergeladen, zuletzt: )

    Unsolicited PMs for support will be ignored.

    Duplicate support requests to the forums and helpdesk will be ignored.

  • Hallo,

    I try to copy the file in the directory, but nothing has changed (both Xcam3 app started or stopped). The smartcard not work and the tvsat channels are not visible.

  • I've tried to install Xcam3, but the smartcard don't work. The card is a Nagravision Italian TvSat and with Mcas app worked fine (directly in the formuler cas slot, not through CI).

    If your card is not listed here, it probably won't work.

    http://www.streamboard.tv/oscam/wiki/CardsList#Nagra


    Does the card work in other devices like E2?

    Unsolicited PMs for support will be ignored.

    Duplicate support requests to the forums and helpdesk will be ignored.

  • If your card is not listed here, it probably won't work.

    http://www.streamboard.tv/oscam/wiki/CardsList#Nagra


    Does the card work in other devices like E2?


    The card is listed in the website, as showed below.

    The card work well with Mcas app and It has not worked anymore since I updated new formuler firmware (I do not understand "like E2" , perhaps Enigma 2?)

    An other question ... I can use a backup (sys/data) to restore the old firmware? It's possible downgrade to re-use old configuration with Mcas?


    Thanks for your kind support.

    Tivusat (IT) (183D/Sat)

    • ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
    • CAID: 183D
    • Providers: 5411
    • id:
    • ECM: ok
    • EMM: ok (DVB-API, mgcamd1.35a on newcamd protocol, CCcam as client on newcamd)

    Tivusat (IT) (183E/Sat)

    • ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 54 49 47 45 52 36 30 31 20 52 65 76 4D 38 37 14
    • CAID: 183E
    • Providers: 5411
    • id: TIGER601 RevM87
    • ECM: ok
    • EMM: ok


  • FIRMWARE ROLLBACK FOR FORMULER S TURBO


    DOWNLOAD ONE OF THE FOLLOWING FIRMWARE FOR FORMULER S TURBO


    https://yadi.sk/d/W97ECGyz3YcdkM

    FAC.Formuler-R.S-Turbo.PATCH.v1.6.11-r15210.ird

    30 Jun 2018, 10:56


    https://yadi.sk/d/cCAMmKbRh06AzA

    FAC.Formuler-R.S-Turbo.PATCH.v1.6.23-r16560.zip

    07 Nov 2018, 12:00

    TEST Firmware Version 1.6.23


    THESE FIRMWARE ARE BEFORE VERSION 1.6.26 (THAT DON'T ALLOW THE USE OF MCAS)



    To restore your console, you must:


    1. Download the file with the firmware.

    2. Rename file to update.ird

    3. Copy it to the root on a USB flash drive.

    4. Connect the USB flash drive to the console and at the time of inclusion in the network, repeatedly press "CH Up (up)" on the remote control before starting the software update process.

    5. After recovery, the decoder will reboot and exit to normal operation


    and then install channel list and mcas


    disconnect your decoder from lan connection to avoid firmware upgrade that don't allow mcas plugin