Issue with Missing IPTV App After Factory Reset on Formuler Z Nano

Hello 175n,

Thank you for your response I tested several times but always the same result !

I'm disappointed !

If anyone can help me

Thanks in advance

Quote from 175n

If you're using wifi, temporarilly connect your device to Ethernet.

Turn off the power to your device. Wait 10 seconds.

Turn on the power to your device. Let the device boot completely and wait another 3 minutes. Don't press anything on the remote.

Open the Update app and verify you have version 2.3.3 installed. (You can see version number in the top right of the screen)

If you have version 2.3.3 installed the update should proceed normally.

Thank you very much Formuler Evangelist, this option worked for me, I was reading all thru and applied this first by connecting to the LAN , and the update came 2.3.3, and it seems to work .. it's my first time of using this box , and it's Z+ .

Regarding the MYTVOnline, pls how do I set it up ? I read where I should send a Mac address to a staff .... Pls kindly assist

This is what I have attached

Hello SAM,

Any solution for me ?

Thank You

Quote from SAM

Do you asking how to create subscription? If yes, please contact your provider, let him register your mac address from Box label (00:01:79:xx:xx:xx) and you will get from him login data (in this case stalker url). Later you have to create portal in MOL1 with that url.

Read also this article -> How to use MAC/ID portal, Xtreme Codes Api (XC) and M3U Url on Formuler Boxes.

SAM, thanks for your patience, pls correct me if I am wrong, the MYTVOnline is customized and optimized for Formuler devices right? I was struggling with the IPTV smarters Pro, after I use similar account on the MYTVOnline, it plays faster and very OK..

now here is my concern about the Z+, how do I get my apk VPN working on it? I use ThunderVPN in my other device, but I cant get it from the Play store here,

I also dont know how to configure the OpenVPN,

pls can you assist?

Quote from SAM

Please do same like kuntash did, see post RE: Issue with Missing IPTV App After Factory Reset on Formuler Z Nano

Hello SAM,

I have tried this solution several times but the results are the same (if necessary I will make a video for you)

I think the best solution would be to send me a firmware with the latest update to find the functionality of the 17 Formuler Z Prime that I have in stock

I count a lot on your kindness and finding a solution to my problem

Thanks in advance

Sincerely

Quote from ilovemytv

Hello SAM,

I have tried this solution several times but the results are the same (if necessary I will make a video for you)

I think the best solution would be to send me a firmware with the latest update to find the functionality of the 17 Formuler Z Prime that I have in stock

I count a lot on your kindness and finding a solution to my problem

Thanks in advance

Sincerely

Display More

So you did it completely how is should go?

Disconnect everything from device? So you have only the box in your hand without any cables/usb in the box?

Then connect utp/internet cable on the box.

Then hmdi

And then the power.

And then wait for start up.

And if its bootes to main menu wait 2 minutes and check then the updater.

Did you all do that?

Quote from Lucky133

So you did it completely how is should go?

Disconnect everything from device? So you have only the box in your hand without any cables/usb in the box?

Then connect utp/internet cable on the box.

Then hmdi

And then the power.

And then wait for start up.

And if its bootes to main menu wait 2 minutes and check then the updater.

Did you all do that?

Display More

Hi Lucky133,

I tried as you told me but still the same result !

I am in despair ! I have 17 products in stock and I don't know how to get out of this situation

I made videos during the attempts, if you want I will send them to you

Is there anyone from Formuler who could send me new Firmware ?

Is there a problem on the Formuler servers ?

Thanks You

Quote from ilovemytv

Hi Lucky133,

I tried as you told me but still the same result !

I am in despair ! I have 17 products in stock and I don't know how to get out of this situation

I made videos during the attempts, if you want I will send them to you

Is there anyone from Formuler who could send me new Firmware ?

Is there a problem on the Formuler servers ?

Thanks You

Display More

Im sorry my friend.

I only have z7, gtv, z8 and z11. There do o have the apks from.

Not from your device.

I hope one of the staff can help you.

They send you a pm and you should give some info then from your box.

Goodluck

Quote from ilovemytv

Hi Lucky133,

I tried as you told me but still the same result !

I am in despair ! I have 17 products in stock and I don't know how to get out of this situation

I made videos during the attempts, if you want I will send them to you

Is there anyone from Formuler who could send me new Firmware ?

Is there a problem on the Formuler servers ?

Thanks You

Display More

try a different network

Quote from kuntash

try a different network

Hi kuntash,

I tried but still the same problem to download the update, on the other hand if I install applications they work well, so it is not an internet or operator problem

Thanks You

Quote from andrefspf

I had my problem solved today. I did a reset for the thousandth time, but this time as soon as I connected to the Internet during the configuration the box restarted by itself, I went back to the configuration menu to finish, when I went to update it updated the version and finally the necessary update appeared, IPTV working perfectly, already properly configured. Thank you all for the support and to those who actually solved the problem.

Nice to know, please what model of device is this?

Quote from andrefspf

I had my problem solved today. I did a reset for the thousandth time, but this time as soon as I connected to the Internet during the configuration the box restarted by itself, I went back to the configuration menu to finish, when I went to update it updated the version and finally the necessary update appeared, IPTV working perfectly, already properly configured. Thank you all for the support and to those who actually solved the problem.

Good job and lucky you.

goodday my friend

Hi,

Could someone give me the contact email for FORMULER directly to find a solution to my problem ?

Thank You

Hello everyone,

I don't know what Formuler did on their servers but this evening I managed to get the updates to 11 Formuler Z Prime done one after the other without any procedure as members of the forum suggested.

I think that Formuler has probably heard about these recurring problems and has probably implemented firmware allowing the updating of certain boxes including my Formuler Z Prime boxes.

If this is the case I thank those who tried to help me but above all Formuler for the posting of updates online

Now My TV Online works on my boxes, and access to Market is OK !

In the coming days I will try the 6 other Formuler Z Prime boxes

Thanks