That´s it ... I have 500 porn channels for all kind of people ... in parent control I deactivate the pin, but I can´t put in favourites anyone ...
It may sound funny, but my tastes are on page 17 and a few others ...
Is there a way ... or we must wait perhaps for years a firmware solution ... ?
with this there is two pin lock:
one is on the provider side and the other is on the local device which you can modify yourself
for the provider pin lock; ask them to remove/change
Hi,this is a known problem,and in the thread "Feature request.....Z11",it is often mentioned for it to return to make it possible to set a scheduled recording from the single EPG,like in z8 and z10.
This thread is only about request for the future for devs.,to implement.
So i would encourage you to make a new thread about the issue,so that for everyone its clear,why the single EPG and the guide EPG work differently.
because mol2 has the proper implimentation and it is missing on mol3.
grid and single has different data sources.
it don't acquire from the same pool.
most times this is resolved by first checking with providers to see if they have any down time.
1. remember barrier obstacles (brick, metal, plaster and concrete) will affect the bt connect quality.
2. if the device is also very close to 2.4g frequency devices quality can be affected.
did you try with ethernet cable instead of wifi?
There was a case that caused this because of bad internet speed quality; increasing the mol buffer to 10seconds helped.
try and see if it would make any difference in your case.
this type of thing is mostly provider related.
with some provider when content is being updated, it will occur.
using the offline m3u can also cause this with some providers if out of date.
try switching to xc to see if it helps.
only the z10 pro max and pro have the ir extender port.
the ir extender can most time cause issues due to it being falty.
it is better to use bt1(as suggested above) or select another spot for the ir remote to get line of sight connection.
3-6ft or so should give optimal signal for the ir
mol3 is not the issue because provider have mainly
xc, mac and m3u which mol3 support.
try:
1. request a line reset
2. if you only have one connection with provider use the mol3 box only on first connecting after the line reset is done.
3. if using mac request that the previous device mac is removed first because multiple macs on one account can cause issues.
also the z11 mac starts differently to the z10.
4. ensure the z11 has the firmware and mol3 up-to-date.
I have big problems with VOD. Its telling ”loading VOD-data failed” and sometimes when watching it closes and gets me back to the mytv online2 page. What is the problem? I have the latest software and also did a factory reset.
common reason for this include
1. broken source id of the vod files on the provider side or unstable server.
2. bad index or encoding of the vod files on the provider side
report the issue to the provider and in the mean time, you can try setting an external player in mol settings like vlc or mx player to see if it helps.
(player must be installed before setting)
providers don't share the same source ids so you may have to redo fav list if using another provider.
if the provider is a rebrand of an existing one it should port over since the source ids will keep the same.
alternative epg is only for mac(stalker)
if it use to work before and suddenly stop then issue is more likely on the provider side.
the data source for both grid and single epg could be down.
also ensure the z11 has the latest firmware and mol by checking software update.
use vpn through the router if supported or install client on the box.
some service may be more compatible than others or require extra settings for best function.
mol main function is iptv so don't think vpn client will be integrated into mol itself.
1. the internal storage is not NTFS.
2. use the memorycard or usb to do recording to prevent any potential OS errors/freezing.
With your two connections:
1. yes you can watch and record on the same device providing that the other is not active.
recording:
2. If watching another channel, the z11 will give a notification about schedule recording before it starts.
the window will have cancel recording or close
using close will not cancel the recording.
if you do nothing it will auto disappear after some seconds.
1. z10 pro has a max ethernet rate of 100mbps
2. if you forgot the pin do manual reset:
remove power, use a paper clip to press the reset button in the back of the unit(it is inside the ir ext port).
While keeping the button pressed, insert power,
keep the button press until the logo goes out then select wipe data/factory reset.
if the box is provider lock then existing configuration may return
-warranty depends on the seller some may give 3months, 6months you will have to ask.
I was told by my provider that it's a 1 connection per box policy, and ended up getting kicked off for a bit when I was doing this.
I was also recently told that if I wanted to watch on 2 different boxes at same time I need 2 connection subscription, 1 connection per box.
I guess my original question was if the provider could tell if I was recording while watching something else?
Maybe I don't quite understanding how a multi-connection subscription works?
Multi-connection subscription works by allowing you to use simultaneous devices/tasks equal to the number of connections.
if using xc, some providers will allow one account to be assign multi-connections.
stalker(mac) has one-to-one.
example of tasks for multi-connections:
pip(require two connection)
recording a channel and watching another(two connection)
pip and recording(three connections)
newer sims can come with update carrior settings.
example with some providers a sim update is required to experience better data speed.
try another storage stick and see if the problem occurs(faulty usb stick can also cause this).
regarding warranty on give away I think only formuler(who you received it from) can offer replacement as a good will gesture.
if you want to watch a single channel and do a single recording, use two connection.
only one active recording is possible.
However, you can watch two channels with the second one being pip.
1. sometimes doing a refresh can resolve that error.
2. check for software updates and install if available.
3. try setting an external player for the vod/series example vlc or mx player.
4. try using xc if on m3u or mac.
also check for update and ensure both the firmware and mol is up to date.
first try:
1. remove any connected accessories from the box
2. try another display(direct connection no av unit)
or another hdmi port on the same display
(make sure to check correct input is selected on display)
3. use another hdmi cable.
4. use another power adapter if available.
hi the z11 mol is strict and picky(which has benefits in some cases) compared to the z10 with m3u.
The m3u is now working, I had to sanitize it.
Working means the channels is now detecting(26 found) using the z11.
before cleaning, channels =0.
screen shot download:
1. Did you check in software update and install the latest updates for the firmware and mol3?
2. try doing a refresh after the m3u file is imported.
thist list not have, this is not provider list, this is a private list starting by "#EXTM3U"
#EXTM3U
#EXTINF:-1 tvg-name="name"tvg-id="xxxx.ca
1. since it is a private list well try opening it in notepad++ for example and resaving it as .m3u
2. install another iptv client on the z11 and also try importing the list.
Hi,
I can't find the way to show my favorites of series on the homescreen.
Thanks for your help
down arrow to the bottom of the home screen and check in
launcher settings>customize channels
then check all you require.
by the way your question is unrelated to the subject of this topic(m3u)
my 2 provider m3u and xc api work, but my safety free local channel list in m3u work on mol2 but found 0 channel in mol3
prsonnal m3u list work on formuler z10pm but not work on z11pm
in the mean time:
1. try switching the part of the url to &output=ts or &output=ts&type=m3u
2. try using a hard copy m3u by downloading it and placing on a usb flash then loading it from mol3.
the all channels not on mol3, it may get included in future.
maybe it was remove to make channel list more organized for the multiple-provider feature and global search.
the advantage of the all channels is that you could navigate by numbers(if you remember the channel) which could be faster than using search.
once the box is off(completely) bt will not work it will use ir mode
ir mode has a shorter distance and can't work if the box is inside a close cabinet.
to fix place the box in a space that is free from obsticles and have a line of sight from box to remote.
try the following:
1. do portal refresh;
2. enable the afr in mol settings(settings>player options);
3. check for software update and install if available;
4. switch connection method example try xtreamcode instead of mac or m3u.
4.1. use another iptv client to isolate if the issue is provider side.
1. mostly, catchup depends on the provider side.
some providers are resellers and they don't verify themselves if a function works.
2. try switching to xtreamcode(xc) and see if any different.
Recently upgraded to Z11 Pro Max from my trusty CC. I have two questions:
1. Is there a better option than the Z11PM's Media Browser that's similar to what the CC and Z8 has? The new Media Browser isn't as user friendly and you can't delete files like you could before.
2. Can I assign VLC Player as the default video player from within Media Browser? The MOL3 default video player is still unable to play all my video types such as AVI even after updating to the latest firmware.
1. android 10 and up has a restriction so you can't delete files.
you will have to brute-force try file managers or use tv file commander or the adb extention for windows explorer(if running windows)
2. open vlc and let it scan for new media then use vlc interface to play them because the media browser don't have any option to set external player.
hello everyone, for two or three weeks my formulate z11 pro max while I watch TV marks me you are not connected to the network, yet my internet works nickel, I change cable and the same
1. in network setting try switching to dhcp if on static
2. wait about 2mins when the box start up because with some routers it will take longer to show connected.
3. update the formuler to the latest firmware by using the software update on the home screen.
4. power cycle router
5. disconnect wifi when onn lan cable
it is good practice that users query the provider to get the min(back) and max(forward) time of epg that is delivered from the server.
This can help to isolate if the issue is on the box or provider side.
Sorry to say,but epg gui hotfix does not change anything on Stalker nor on XC connection
that fix is a tiny visual fix not a functional/feature fix.
some provider have restriction on streaming when using hotspot feature.
example with some vodafone plan:
1. try disabling content control.
1.1. for example, you're only allowed to hotspot an extra 30GB at max speed for tethering to additional personal devices. After that, your speeds will get capped at 2Mbps.
2. on the formuler box set the buffer time to large in the mol settings.
normal case is the epg sources for single and grid is using different data supply and not one source for both.
that is why other client will give more data because the dev may use the grid source instead of the single source.
since epg server data is not standard, clients dev usually work to meet the server 75% of the way to present epg to the user.
1. in network settings of the formuler enable dhcp if it is off and set secure dns to off if on auto
also disable estimate location if on.
2. ensure no other apps are running in the back-ground(double press home button for the task list) and press up on each app to close it.
if you don't want the catchup icon you should be able to hide it by disabling "show catchup in epg"
(mol menu->connections>enter on portal name--select edit.
then disable "view catchup in grid EPG")
