How many days of single view epg do you normally have,i usually have 8+ days,it might be that your provider is on a Cristmas break,being behind with epg updating?
Whats the last day you had a epg update?(You can find this in CS)
Last epg update is from today, but when i have 3 day’s single view, why dont a have normaal epg ?? There is epg data in singel view !
If on XC connection try this; Content Manager>content sources>sub>show hiden info>edit.set epg update interval to 3 hours,update.
It ay take a while for the epg to populate,see if its better tommorow,and in the mean time you can also do refresh contents and check for the latest epg update date in Content Source
I had it on 3 hours interval al the time, its like this sinds the latest software update. After the update i had epg for some day’s and than it stops. Single view epg is for 3 day’s for now.
How is your single view epg,if also no epg there,probably provider issue.
Hi there, i have the same problem , no epg. I have single view on both my Z11 boxes but no normal epg. I have the latest firmware on the boxes, whats the problem? I have xcapi connection on both.
No , i bought the box brand new on B.O.L.C.O.M ( Henkie nows where ). I went to the home screen of the box , click on system info , scroll down to build datum and press 0 ten times. Then you get a popup so you can reset. The box will restart and you have no more connections and can add a new one. I did not read any info on the site where i bought this box that it whas setup for a privider.
I fixed it, i can add portals now.
I found it thanks, all ok now.
I ended up finding "check for configuration upgrade" because it is not at the same place on a z10 box and after pressing 10x on the zero key, resetting the configuration file worked
I now have a clean mol2
thanks again
I have the same problem , where did you find it? How did you do it?
Hello,
Today my Formuler Z10 pro max arrived I have a Z11 pro to with works fine. I was setting up the Z10 but, i wanted to add my iptv provider but i cant. I dont have a add button at the connections group? Factory reset did not help , IPTV Totaal whas already there but is empty and i can put no url there. I can only go back or to IPTVTotaal ?
Ahh thanks for the reply guy's.
Hello,
I'm new to Formuler box , when i'm going through channels groups i see groups that have a kind of play icon ( circle with red triangle in the middle ). It wasn't there before, did i do this somehow? What does it mean and can i remove it?
Same as others here, the guide (after clicking guide on the remote) doesn't go further into the future than a few hours.
The EPG which you get when pressing the right button, does show all data.
I've also got an issue with the displayed info. When you set an offset (tested -1 and +1 hour) the info bar shows "no information". When you don't set an offset it shows the current and next program as expected.
The same here
