Articles

Important:
Maintenance and Forum software upgrade tomorrow at 17:00 EU time (21.01.2020). Forum will be offline for few hours.
The next two days after the first maintenance, will follow few smaller with offline time.
Thank you for your understanding.

How to format Micro SD card, USB flash drive, pen drive, hard drive or SSD for use with Z and S Boxes.

How to format Micro SD card, USB flash drive, pen drive, hard drive or SSD for use with Z and S Boxes.
If you format your recording device (in most cases SD Card or USB Stick) with your OS and experience strange behaviour on your Box, recordings are not finished or not saved on the recording device, then could unsuccessful or wrong formatting be the reason for this issue.

Formuler Boxes support following format:
FAT32
NTFS
exFAT

For now it is not possible to format directly the recording…
SAM
6
0

Troubleshoot "No Signal" or "Invalid Signal" on TV

Troubleshoot "No Signal" or "Invalid Signal" on TV

Check the steps below to resolve "No Signal" or "Invalid Signal" displayed on your TV:
Check the HDMI cable connection at the device and TV
Select the correct Input on the TV
Check the supported resolutions on your TV.
Your Formuler device might be set to an incompatible HDMI output mode.
Turn ON the TV
Pull the power from your Formuler device.
Plug power back into the Formuler device.
Wait at least 2 minutes for the box to boot up.
Press the…
SAM
1
0

Recovery instructions for “IPTVLauncher has Stopped” issue.

When the device is powered on, “IPTVLauncher has stopped” error message is shown and the device does not continue to the home screen.




Solutions:



I. Update App Method: Non-destructive

While “IPTVLauncher has stopped” is on-screen, press and hold the MENU button on the remote. The recent apps list will be show on-screen.
If the “SW Update” app is listed, proceed to step 3. If “SW Update” is not in the list of recent apps, you must use one of the alternate recovery solutions below.
Select…
SAM
0