Posts by naidu

I am getting Mode Not Supported error on TV ( The resolution is not supported on this TB. Please change resolution). I tried to change the resolution but still nothing is showing up.

My kid accidentally locked one of the channels. How do I remove the password? It seems like there is no confirmation when settings channel password.

Quote from Shoma

Or you press and hold vformat and you will get PQ Setting options and be able to change your Display Mode.

Are there any recommended PQ settings?

Quote from mickymoo

Hi maroof23

Everything droidbug said is correct. Also, make sure in the display settings that you don’t have the HDMI auto adaption box checked! Otherwise, when you restart your box you’ll be back to square one!

Thank's I wondered why my settings were reset.

Quote from SAM

Rayling, i send you pm could you please answer me. thx.

Yes, North America box. I have the same issue. I can't turn on Bluetooth purchased it on Amazon: https://www.amazon.com/DREAMLINK-FORM…dreamlink+z7%2B

Quote from Daz

Guys, I think I've sussed this issue, change your resolution [lexicon]settings[/lexicon] to 1080p ,I found it works

[lexicon]Settings[/lexicon] to auto detect should automatically set this to 1080p. Unless you manually changed it on the remote.

Quote from SAM

Don`t understand really the problem. Z7+ have Wifi and Bluetooth on board and it works very well, see picture.
Picture: First is paired (phone) and second available for pairing (tv).

On the NA version which has external wifi dongle. It doesn't seem like it has Bluetooth on it.

I use .5 I have fast VPN!

There is no Bluetooth on NA version.

Quote from SAM

Test procedure.

• FW - 1.2.16
• MYTVO - 1.9.6
• Software and Factory reset done under [lexicon]settings[/lexicon]. New install and set all needed.

Used sd cards.

• Patriot 32GB - Formatted with Fat32 - works fine
• Sandisk 32GB - Formatted with NFS - works fine
• Samsung 64GB - Formatted with exFAT - issue

For formatting devices like SD Cards and USB Sticks i use always only Rufus tool. Rufus 2.18 -> https://rufus.akeo.ie/?locale=en_US
Check Box activate only "Quick Format".

After 2 hours continues testing with 2 different sd cards and maybe >20 box restarts i was not able to reproduce the issue, not even once! Did Recordings, Timeshift, even scheduler Recording trough EPG and send box in standby, before the movie started the box goes ON and recorded. Must say this is the best MYTVO since beginning.

At end i took Samsung sd card from my old phone and formatted with exFAT. First all worked well and after restart i was finally able to reproduce the issue, only pull out helps. Ok, took the same card and formatted with nfs, works now very well like the other sandisk, even after 4 restarts no problems.
Please format your sd cards again, with fat32 or nfs with Rufus tool but not with exFAT.

Display More

Thanks, SAM.

Quote from NYP

Same problem Scandisk extreme micro Sd card 128 gb. Works fine with usb drive

Update : Working now with Micro Sd card . User error . After card was formatted to Fat 32 correctly it works fine . Im not used to windows 10 and was using EaseUS partition tool to format the card , wasn't clicking on complete to finish format

I was able to get it to work. I downloaded EaseUS partition tool formatted it to Fat32 with 64 cluster size it worked. When I got it new it seems like it was formatted to Fat32 128 cluster size using windows 10. Not sure if the issue was with cluster size or windows format tool (fat32 format).

@SAM It seems like NA version has an issue with SD card with the last firmware version.

Update: I was able to complete the update. Error seen above is caused when I put my Samsung 64GiB SD card and boot the box. Once I remove the SD card it seems to work fine. Anyone know what's going on here?

Ok I was somehow able to get to [lexicon]settings[/lexicon] using Menu but I tried both software and factory reset it doesn't seem to do anything. I keep getting this error:

I can't get to [lexicon]settings[/lexicon]. As soon as box logs in there is a pop that says "IPTVLauncher keeps stopping" which I can't rid off. Also when I tried factory reset I get an android sign with a red triangle. When I look at the USB drive it creates LOST.DIR Android -> DATA -> com.google.android.gms folders but they are all empty. Any other suggestions? Are there any recovery tools available?

Caused issue for me: IPTVLauncher keeps stopping.

Model: Formuler Z7+
Retail Box or Provider Box: Retail Box
Firmware version and date: 2.8.0 / Z7+ 1.2.16
MYTVOnline version and date: 1.9.6
Factory reset done and when?: Yes, I get sleeping android with red triangle mark and system reboots.

After upgrading my "IPTVLauncher keeps stopping" popup. Nothing happens on retry or exit. I tried to do a factory reset but I get sleeping android with red triangle mark and box reboots. How do I fix this or I need to send the box back?

It seems like the issue might have been caused because my VPN auto connect on start canceled the firmware update and completed the MyOnlineTV update first. However, after rebooting it seems like firmware was updated successfully but I get error "IPTVLauncher keeps stopping" popup.

I wonder how T2 does it.

Hello,

How do you change between Channel list style (Classing & Normal) using remote? I know we can go to [lexicon]settings[/lexicon] and change it.