Open support ticket on Formuler Helpdesk and report.
Thanks Sam. I've opened a ticket. Also in terms of new feature do the devs have this in their horizon?
1. showing the listing in List mode vs tile mode. Most TV Series don't have the thumbnails and its blank.
2. setting favorites on TV Series
Hi. I would like to report a bug on Series Listing. I have created a video showing the bug.
Is there an email or a thread I should post to?
Yes I used wireshark on a Windows machine with 2 lan interfaces. 1 interface with internet connectivity and the 2nd interface directly connected to the LAN port on the z8. I turned on connection sharing (ICS) between the 2 windows lan interfaces so that the z8 can get an IP via DHCP. Then I started the capture on the z8 connected lan interface, connected to my portal on the z8, then stopped the capture once connected (probably on need a couple seconds of capture). Search for "device_id" in the captured packets and the values should be there.
I must thank you in Gold for this information. I've followed your instructions and was successful in getting this information and make it to work. I did a backup on shield and then transferred the backup to laptop and copied and pasted the details.
sn=
device_id=
device_id2=
signature=
stb_type=
Thanks Again !!
I think its a bug! It still forever and not all epg are loaded!
I have the same bug, I'm on the latest bets. The EPG Load is persistent and does not go away. The EPG also shows up just fine. In my case I can confirm that the EPG loading is there all the time. Even if I'm watching the TV for 4 hours, the sign still shows up.
Yes I used wireshark on a Windows machine with 2 lan interfaces. 1 interface with internet connectivity and the 2nd interface directly connected to the LAN port on the z8. I turned on connection sharing (ICS) between the 2 windows lan interfaces so that the z8 can get an IP via DHCP. Then I started the capture on the z8 connected lan interface, connected to my portal on the z8, then stopped the capture once connected (probably on need a couple seconds of capture). Search for "device_id" in the captured packets and the values should be there.
Thanks I'll try it out today. I was listening in on Wifi and could find the IP on UDP but not TCP. Couldn't find out the details. I asked my provider and he gave me some details but not the device id/2 and Signature. The Idea of ICS and isolating the Z8 is a great idea. Thanks for the Info.
Display MoreGo to:
Setting --> Profiles --> <your_profile_name> --> STB Configuration
The "Serial number" (sn) setting is there on this page, right below "MAC-address".
From this page, select "Device ID" which will take you another page. Check the "Send Device ID" and "Custom Device ID2 and signature" check boxes.
This will allow you to set device_id, device_id2, and signature.
Back on the "STB Configuration" page, select "Hardware settings", and fill in "Hardware version".
Hope this helps!
Thanks so much. I'm trying to sniff out my device_id and device_id2 and signature with wireshark but can't seem to find the conversation. Did you use wireshark for conversation find?
Can you please elaborate where do you put this info on stbemu. I'm trying to use the same provider (one at a time) so I can test the functionality.
I can't seem to find out where to add it in stbemu.
With this beta, is it possible to sort the vod view from tiles to the list view.
One issue I have noticed is that when I search for a series from a list, it comes back with no results. but a manual search will bring up the series.
Also Adding Series to Favorites I can't seem to find.
