So I reconfigured from the beginning and put back the same settings and now it connects again.
Just for information: No need to contact my provider as I am the system administrator.
In my opinion there was a configuration bug from the server and the Configuration Deployment Tools because I redid and reset the exact same settings and it worked after four attempts.
Hy,
While configuring the device today, I am encountering this connection problem that I have not had until now.
Whether it is in manual editing mode or when using the deployment tools, I can no longer connect to the portal.
I have checked everything and even if I activate the cloudfare one one one one dns.
How can I unblock this?
Thank you.
Of course, I also tried another diet and it didn't help. My supplier also replaced the device after testing it.
So I managed to get him to leave, but with great difficulty. The problem I have is that as soon as I use it, it crashes and restarts or it freezes and I have to start it again.
In my opinion it has a hardware problem or has anyone figured out how to solve this problem?
Thanks
Now the box is completely stuck on the FORMULER logo at startup and I can't do anything. How to unblock it?
Hi,
I just bought a Formuler Z10 Pro. After the initial configuration it asks me for two updates as usual. Everything goes well for the MoL2 application but it creates problems for the Android 10.10.41 update. Some times it crashes during the download and it restarts or once the download is finished it doesn't install the update, it stays stuck at 2% and then it restarts. How can I solve this problem?
Thanks
Great, I look forward to it. 
Hello to all,
Is there a new procedure like for Mol2 to customize the Box,
Upload Config.enc3 file to your server ?
Hi everyone,
I would like to inform you that everything has been solved regarding the connection to the portal.
According to my logic, it is possible that the problem came from my internet operator because since this afternoon, with the same public IP address with which my box did not connect, it has worked again without any problem. So I think the problem was a bad trace route between our server and the IP address range of our provider. I would like to take this opportunity to say that the Express VPN application is a good alternative if other people have the same problem.
Thanks
I am a Panel administrator myself and I have already tried to redo and modify my box line without success. Some customers have been able to unblock their box by doing a hard reset of their internet box router and with several attempts the public IP address changed and then miraculously the Formuler box worked again. I haven't had any success yet and my router has been switched off all night but my public IP hasn't changed. I will try again or see if my ISP can do it for me.
I have also noticed at home that if I let it load for 5-10 minutes, the loading bar works and connects at 100% but when I open the programmes either they do not appear or they appear but zapping is impossible because as soon as you change channel, the image does not come or it appears after 2 minutes. It's very unpleasant. I tested the internet connection and it's fine and if I use other applications I have no problems apart from Mol or Mol2.
I have already checked everything, the neighbour's site has exactly the same settings as mine. I also connected to his site via Teamviewer to check all the connection settings, dns etc and everything is the same. Firewall idem. What I don't understand is that in m3u and vlc on my PC it opens but in stalker on Formulaer the portal line loads up to 10% and doesn't go further. I have read in forums this type of situation and unfortunately there is not one who could give an answer or a solution. I have read in forums about this type of situation and unfortunately there is not one who could give an answer or solution. There is even one who says that after multiple resets of the router, everything came back as if by miracle. I'm sure it's great, but I'd like to know why it's doing this on the Formuler device and not on other devices.
Also did a router reset, and even with the vpn it doesn't work. I tried my box at a neighbour's who has the same provider as me and by miracle, everything works. I don't understand anything anymore.
Yes I tried too, I even did a factory reset of the device but nothing to do.
From one day to the next, I can no longer connect to my provider in XC code, although I had never had a problem before.
The load freezes at 10%. I asked my provider if there was a problem with my ip, he said no and anyway, connecting to my android tv on another app still works.
I tested this same app on the Z10 pro Max, same thing, no connection to my provider.
Software version: v10.10.41
Version mol 2: v10.10.38
I tried to apply all the solutions suggested here without success.
The ipv 6 is disabled, I sometimes managed to connect by setting a static ip in the android network options, but after disconnecting, it doesn't work anymore with the same symptoms
I also did a factory reconfiguration.
I have tested different DNS from my internet provider.
I tried changing the ip of the box on my network, same thing!
What could be the cause of this?
Thanks
Great, thank you very much for your help.
It works a lot better. I think then that the bug was probably due to the fact that the epg filled the memory of the box lorceque I was in classic mode and the reinstalled the application, the latter was reinstalled since the departure and suddenly, she has eliminated the previous bugs.
Thanks again.
Sorry I did not understand. Uninstalled MOL?
Are you talking about My TV Online?
Hy,
After the last update, I have a big problem when I want to zap in classic mode, the system is very slow, the programs also open very slowly, after 40 to 50 seconds. By cons if I put myself in normal mode, it is a little better. I realized that this comes when the EPG are not yet displayed, but as soon as they finish loaded, in classic mode it's a real disaster. Why this big problem when before, it worked very well?
I would ask the Admin to re-enter the TV Series as soon as possible please and communicate it to us.
Hello, since today, I wanted to update the beta version of MyTVonline on a new device and unfortunately I no longer have the TV Series. I went to control the version and I have the V1.9.23 while the Version 1.9.22 we have the TV Series. Can you help me? Thank you
What I find unfortunate with MyTVOnline is to have to relaunch the portal every time to update the list of channels when they were changed in the Xtream Codes panel. A thing that there is no need to do with devices type MAG, because they are updated directly as it works portal url while MyTvOnbline works in copy.
Hello everyone,
Do you have news about the update?
Many people are seriously starting to get impatient because they can not access a TV Series.
Do you still think this week?
Thank you
Hello everyone,
I received this morning from a client, a Formulate Z Prime blocked on the current Android installation.
Hello everyone,
I received this morning from a client, a Formulate Z Prime blocked on the current Android installation.
I can not do a reset. How can I proceed?
For your information, I received a tutorial by email but without success.
Tutorial:
#. Manual Recovery
1. In USB root
2. Create new txt file
3. rename it to _recovery_facinit
. without file extension(.txt should be removed) / it should be only "_recovery_facinit"
4. insert USB in Z Prime
5. disconnect power and power on again
6.
"!!! at the same time(important) !!!" , press CH UP on RCU
continuously. . click CH UP button continuously,, clik clik clik clik
...... right after plug in.
7. Android update animation will appear. (Stop pressing CH UP button now)
8. it will factory reset with Android Logo if it works.
A. If you don't see "android logo" and box boots like normal situation, there must be something wrong.
(Please retry. maybe you can click CH up button before plug in the power)
B. If you see "Android logo" with ERROR message, the box cannot be reset with manual factory and needs to be repaired.
* “_recovery_facinit” file will be deleted from the USB once it is used correctly for one receiver.
To use for another receiver, you may want to create the file again.
Thank you for your help
