What's the reason the color buttons cannot be "known/reproduced" while in TV Mode ?
Exemple : the BT1 remote control works perfect with the Samsung TV, except the functions under the color buttons. I have to use the original remote to access these functions then (= 2 remotes to be used) I'd like to understand if this is something do-able in the future for BT1.
Just insalled VLC from Market (3.3.4). Z8 + App up-to-date.
Graphic problem when moving arround in the app menu (see attached).
Am I the only one ?
TV Model :
UE55HU7580T
Attached you can see a remote pic.
When I go to "Setup TV IR" I see that for Samsung TV the Hotkeys buttons are not in blue (see other pic attached) maybe that's the reason why they are not usable.
Thank you for your help.
Maybe I should reformulate :
Is it possible to setup hotkeys from BT1 for controlling samsung TV (same as the original Samsung TV Remote) when connected in TV mode ?
Thank you
Is there any reason why the color buttons are not programmed as the Samsung original remote are ?
Thank you.
What do you want to be refreshing automatically? Only because, at least in my case, the channel list and VOD already do...
Not me. I have to push « refresh » manually otherwise VoD & Series are not up-to-date.
Would therefore be usefull to have an aut-refresh each time we switch on the box from Standby.
|FEATURE REQUEST|
Auto-refresh when connected XC/Api
(Not to have to do it manually).
|FEATURE REQUEST|
« Newly added » as the filter by default when connected XC/Api for VoD & Series in the parameters.
The default filter is « default » and I systematically have to change it manually.
I know that we can « manually » hide categories as described previously in this thread but for your information empty categories for Series are still visible when connected XC/Api (not visible when connected MAC/id)
I know that we can « manually » hide categories as described previously in this thread but for your information empty categories for Series are still visible when connected XC/Api (not visible when connected MAC/id)
Why not using the Refresh in Menu from MOL?
Maybe because XC Api Portal have much more features than Stalker MAC/ID and registering MAC/ID is for XC not necessary.
I use the Refresh button (when connected XC) but, as I said, Stalker remains for me the best connection for the reasons mentioned above.
You said that XC API has much more features than Stalker, such as ?...
Thanks a lot in advance.
When powered off (not standby) it is not possible to switch on the formuler with the bluetooth remote, is that correct ?
For my prospective MAC/ID is by far the best connection : seems to be "more direct" with the server, VoD and Series always up-to-date (no need to presh "refresh"), etc...
As someone said, Formuler recommands XC/API instead of MAC/ID. On my side the problem with MAC/ID is when I switch on the Formuler z8 (from Standby) : everything works great regarding "LiveTV" but VoD and Series have an error message ("error downloading VoD Data). I do not know if this issue is known on Formuler side but I have to reboot the box each time.
Also IPTV Providers have tendance to recommand XC/API instead of MAC/ID...not sure why but certainly because of security reasons on their servers.
- When using XC/API I have to select manually "newly added" for the sorting on VoD/Series.
- When using MAC/ID the sorting is automatically on "last added" which is perfect.
-> is there a way to have "newly added" by default for VoD/Series when connected XC/API as well ? Default is "Default" but in the facts it doesn't mean "last added".
Thanks.
Could the volume buttons on the left be in "TV" mode while the rest of the buttons remains in "STB" mode ?
It's anoying to switch modes to change TV/Home Cinema volume for instance.
Apple TV remote does the trick easily. Tell me if I miss something....
Ok. I'm a little bit surprised but well noted.
Thank you.
Same problem for me.
Had to choose WiFi instead of Ethernet.
|BUG REPORT|
« VoD Data could not be loaded »
This occurs each time I switch on the Z8. Have to reboot the box to fix the issue.
Connection : Mac/Id (Stalker)
Power mode : Standby
The problem is not reproduced while connected with XC/Api (same sub).
Has the issue been reported already ?
Fixed.
Thank you !
Tried to reboot several times. No remote status.
How did you pair ?
Can I unpair and pair again ?
Pairing Z8 & TV Samsung worked good.
Nevertheless despite success of pairing mentions "disconnected", "unknown current FW" and "no battery indication" are visible, is that normal ? (see pic attached).
Furthemore, if I want to shut down Z8 + TV I must :
- 1. Press STB (to shut down STB)
- 2. Toggle (3sec) to pass in TV Mode
- 3. Press STB (to shut down Samsung TV)
….which is a little bit long...
If you compare with old RC (see picture attached) you can Switch OFF STB (on the right) and TV Samsung (on the left) directly which is much more quicker/convenient.
Room for improvement there for my point of view. Maybe improving HDMI/CEC capability on the Z8 (TV switching automatically with Box) or giving the capacity to the GTV-BT1 to mix the function.
No sellers in Switzerland and none of the sellers in the EU (WoS, etc...) ship to switzerland 😕
How to get one ? Any idea ?
I tested same from your pic, all trailers in the row works fine.
Sorry my mistake, had to re-install YouTube and now everything works fine. Thanks for your help !
So no idea....worked fine until Beta
Set English language.
No changes. Only crash when trying to watch trailers. Tried 6 trailers.
- VoD Categorie Tittle problem. See pic attached.
- Crash VoD trailers (XC/API)
- Development of Bluetooth RC
- Capacity to hide unwanted apps on Cockpit
I merged 2 m3u url links into one, and pip works great.
Ok good thanks, you use m3u connection but does it work using 2 XC/API portals having 2 different URLS ?
I've contacted my suppliers and they say No to using this feature
Same for me, they said one connection per URL Line (due to security reason), thus my question was :
Would it be possible to use these feature using 2 XC/API URL line (like if we have 2 abonnement on the same supplier)
|QUESTION|
To be able to use "record one channel while watching another channel" and "PiP" features, is it mandatory to have 1 line allowing 2 connections or is it possible to use these options having 2 different URL allowing 1 connection at the same time.
Thanks for your help and support.
Channel numerotation on favorite group seem to have a problem despite a (apparently) correct configuration on my side.
See pics.
good, good, good SAM !
Thanks a lot for the good job. Looking forward to test.
See Picture attached :
For EPG Downloading, would be better to keep the green part only and remove the red part.
As we all know the EPG downloading time is now longer due to the correction of the recent flood ban problem....I don't like that text to popup longer each time the Formuler switches on, only the logo, would be for my prospective better.
Quick question :
Why is NordVPN app populated twice in the Market ? (See pic)
Thanks.
Formuler have implemented the Trailer support for MOL2 not matter which connection type, but it is new to me that Stalker support this also now and IPTV Panel`s too. Some video from connecting until video play would be nice. Please pm me.
Will do
100% sure !
I even removed the XC/API connection to double-check and ensure it was connected to MAC/ID only.
It must be related to the IPTV provider….
Tell me if you need something else.
Movies Trailers on VoD are now also available being connected MAC/ID. Until now they were available being connected XC/API only. That is good, but I'm surprised : is that "Box last release" related or IPTV provider related ?
Do we get Beta Today ?
Go to https://support.formuler.tv and submit a new ticket regarding this.
Done
Hi,
None of these 2 actions work. Strange….Anyway thanks for the support.
