Posts by SerGoy

I’m using a Formuler Z11 Pro Max BT1.
All firmware updates are installed, and I’m currently running the beta version.

In MyTVOnline3, Timeshift is enabled and working correctly. However, I have to manually activate Timeshift every time I start a channel or switch channels. When changing channels, I’m forced to disable Timeshift first, otherwise channel switching is blocked.

I’ve seen references indicating that Timeshift can be set to activate automatically, but I cannot find this option anywhere. When I enable Timeshift in MyTVOnline3, I only get a simple ON/OFF toggle — no “Automatic” or “Manual” mode is available.

Is there a way to enable automatic Timeshift on the Z11 Pro Max, or is this feature restricted by the portal/provider configuration?

Any help would be appreciated.

Before asking the question, I searched everywhere for an answer but found nothing. If a solution already exists, please let me know.

I have a Z11 Pro Max, and when it starts up, MyTVOnline3 shows a black screen. I’m forced to install a VPN (Windscribe) in order to get a picture. However, the VPN slows down my Internet speed so much that the image becomes choppy.
How can I fix this black‑screen issue without having to use a VPN?

Hi everyone,

I have installed the MYTVOnline+ application on my phone, but I can't seem to connect to my portal... ()Stalker)
Do I have to change the MAC address to connect ???

I get an error 1012

Thanks for your help

YES it's done

Quote from henkie

Of course you can ;go to homepage>settings>apps>uninstall mol3>reinstall from Market.

Btw do you use VPN,if so disconnect.

Hi,

In my case I receive an error 1012 when connecting to a portal (stalker)

I tried everything you mentioned, but nothing worked...

Hi Sam

Is it possible to create a key to configure other Z11 Pro Max and MYTVOnline3 ?

Hi

How to explain...

Z11 Pro Max / Stalker

I have created my favorites bookmarks and enabled auto numerating (1, 2, 3, etc...)

When I program a recording, I do it with my favorites...

When the recording ends, the schedule has left my favorites to be placed in the group corresponding to the recorded channel...

Is it possible that at the end of the recording that my favorites are displayed and not back in the groups???

Quote from henkie

What works perfectly,EPG are yuo on Stalker connection?

How many days epg ahead do you have under the guide buton?

Stalker and I have 2 or 3 days ahead,,, Not more

Hi

2 things :

1 - Make sure you can schedule recordings from the classic guide

2 - As the Z8 can do, set up a notice that a recording is in progress in order to avoid the accidental closing of the Z11

Hi,

Not really knowing where to put this request, I did it here...

Would it be possible to add CyberGhost app in MARKET/VPN???

This application is really interesting and would facilitate its installation instead of going through Google Play which is not easy for everyone.

[Stalker]

Hi

Have the ability to schedule a recording from the classic guide

Thank

Hard reset

USB stick 3

Since this morning's update, the Z11 Pro Max no longer sees my USB3 key

Quote from blacksheep

Completely new here, however I get the storage disconnected message myself.

Try to format in NTFS with Rufus

Quote from SerGoy

Hi Sam

INFORMALLY

I always have the problem that my Z11 Pro Max does not display my USB3 key,

• Yes the beta update is installed on the Z11 Pro Max
• Yes I did a factory reset more than once.
• Protocol: Stalker

USB3.2 GEN 1 formatting method:

With my PC in fat32 and NTFS

With Rufus in Fat32 and NTFS

None of the 4 models worked

The key is perfectly functional on any device (Z8-Pro / Z10 Pro Max / PC / etc.) But not on the Z11 Pro Max

At some point (without knowing why) the USB3 key appeared in my storage equipment (after a factory reset) and I even managed to make recordings on it…
But after a few starts from the standby of MyTvOnline3, everything is gone again.

Also I noticed that even if the USB3 key is not connected, it is still identified in the MyTvOnline3 settings (dvr option) but not in the Z11 equipment storage settings.

Thanks for reading my findings...

SerGoy

Display More

Today I connected my Z11 to review the configurations and like magic, my USB3 key reappeared.

Accustomed to the Formuler boxes, I always try to understand...

SerGoy

Hi Sam

INFORMALLY

I always have the problem that my Z11 Pro Max does not display my USB3 key,

• Yes the beta update is installed on the Z11 Pro Max
• Yes I did a factory reset more than once.
• Protocol: Stalker

USB3.2 GEN 1 formatting method:

With my PC in fat32 and NTFS

With Rufus in Fat32 and NTFS

None of the 4 models worked

The key is perfectly functional on any device (Z8-Pro / Z10 Pro Max / PC / etc.) But not on the Z11 Pro Max

At some point (without knowing why) the USB3 key appeared in my storage equipment (after a factory reset) and I even managed to make recordings on it…
But after a few starts from the standby of MyTvOnline3, everything is gone again.

Also I noticed that even if the USB3 key is not connected, it is still identified in the MyTvOnline3 settings (dvr option) but not in the Z11 equipment storage settings.

Thanks for reading my findings...

SerGoy

Here is a really important constraint regarding recordings with the Z11 Pro Max...

From a box that is turned off, unlike earlier versions, if a show is scheduled for recording, the box turns on, selects the channel of the show to record and finally records the show... (The channel and record are on the same channel)

The Z11 turns on without selecting the recording channel and the program, which is on another channel, is recorded. Beyond that 2 channels are selected, one listening (even if the TV is off), and the other recording and creating recording problems for those who have a one-line Internet connection, which is the case in North America...

Quote from fokemon

the problem is not how the the ssd or pendrives are formated!

same storage was used in my z8 and everything ok.

formated with rufus , probmem still there.

the problem must be the z11 firmware.

timeshift also acts very weird in this box

SAME...

Problem with formatting

I am using rufus or my pc windows 11

Prevent turning off the Z11 during a recording

Quote from bjel7596

Hi I can't fast forward vod or series on z 11 max. I have a z 10 pro max that it works on. If they can't arrange it, new arrivals are saved when this is selected.

I believe that when the scroll bar is showing, you have to arrow up as a step to then move forward

(STALKER) : Also it was possible to program a recording through the classic guide (OK button), which is no longer the case...

Quote from SAM

Try with Factory Reset.

With a factory reset, I managed to see the USB drive in storage items

BUT I lost it during an update.

Here's how I did this time:

1 - Factory Reset

2 - Once everything started, I inserted the key and saw it in the storage settings of the Z11 (I still haven't started MytvOnline3)

3 - I started MytvOnline3 by creating the Portal (Stalker) and now I see the key...

What I noticed is, I lose the key when updating. I have to start over with a factory reset

Weird what happens

I put a correctly formatted USB3 key named RECORD

I go to MytvOnline3 / MENU / DVR OPTION and see the RECORD key

I remove the RECORD key and I can still see this key in OPTION DVR

I formatted another USB key / correctly and I named it REC2 and I went back to OPTION DVR and the first RECORD key is still there yet replaced by the second in the name of REC2

Quote from SAM

If not recognised correctly from the box then is something wrong with the USB Stick or format. Reformat with NTFS again, connect with box and restart the box once, set in MOL3 dvr menu the recognised stick for recording and timeshift. Try also other usb stick.

Everything that is written I have done

Change key to a functional one

Reformatted with rufus to NTFS and also tried FAT32

Restart the Z11

None of this works

Should I try a hard reset???

Quote from henkie

Do you also have USB 2 inserted at the same time?

No I only have one USB3 key

I tried to put in the USB2 port but same result, the key is not seen by the Z11 Pro Max

Hi

USB3 :

I installed a USB3 key in the blue port, but the Z11 Pro Max does not see there... Therefore, no recording...

Formuler Z11 Pro Max don't find my usb3 key formated with Rufus NTFS

I understand that the Z7 / Z8 / Z10 works 1 portal at a time. If we listen Portal #1 then Portal #2 is deactivated... (vice versa)

For the Z11, I understand that the 2 portals remain active... So just creating a second portal identical to the first would it work ???

Hi,

Watch one channel and record another

In North America, the Internet has only one line.

Knowing this: Is it possible, in North America, to watch one TV channel and record another with the Z11 Pro Max ???

Quote from SerGoy

Same here

Fixed with a hard reset

Thanks Sam

Same here

Quote from henkie

I followed your suggestion"Quote SAM;Maybe its time to start using XC API Portal instead of MAC/ID"

Can you in short explain what the advantage of this switch is?

Prevent accidental stopping of the box during a recording
This system is available on the Z8-Pro

Quote from SAM

On Stalker you can not change it if setting was made from Provider, but... if you ask provider he can set it up much higher for your account. Some users did same and got up to 10 hours etc.

Maybe it`s time to start using XC API Portal instead of MAC/ID

I think we don't understand my question...

When the Z10 Pro Max is turned off and a recording is scheduled, the Z10 Pro Max turns on to make the recording. So far everything is perfect.

However, if by misfortune I take the remote control WITHOUT LOOKING AT THE Z10 Pro Max and I press the button to switch on my box While it is already running, then I switch it off and stop recording the same shot...

With the Z8-Pro a message appears that a recording is in progress.

Quote from Staff

Check Playback limit in in settings and change it to off

MyTVOnline2 > Settings > Playback limit > Off

Stalker : I can't change it

Quote from Staff

MyTVOnline2 > Settings > Player Options > Resume Playback > select Resume

Yes exactly what I meant. I made the change in the settings and everything works wonderfully.

There remains one thing to add, preventing the Z10 from accidentally shutdown while recording...

Quote from henkie

Hi SerGoy, I don"t know how it works on a Z10promax, but on my z10 pro I simply push the pause/play button once to stop the movie or tv serie I am watching,and push it once again and it resumes from exactly the same spot were it ended.

I don"t understand the part in your post "if we have to leave the listening"?

If I have to leave the movies or series section, when I return, with the Z8-Pro, I can resume reading where I was. Which is not the case with the Z10 Pro Max

Is it possible with the Z10 Pro Max to be able to do just like the Z8-Pro memorize the location of a movie or series playback, If we have to leave the listening, the replay is done from the beginning. One should be able to resume playback from the location where it was stopped.

Sam, tell me where to put a wishlist (request) for the Z10 because I couldn't find it. I found only for the Z8

Hi,

2 things that would be fascinating to have on the Z10... One is already present on the Z8-Pro...

1 - Prevent accidentally turning off the Z10 while recording

2 - Have the possibility of deleting recordings by selecting the day (date) in order to delete all the recordings of this day.

I'm from Quebec Canada and I can buy Dreamlink and Formuler...

SAM: I didn't do the .36 update... I waited for the .37 version to do it and I actually have the really poor sound issues...