We are relatively new to this Formuler Z10SE box. When we schedule a recording (for four hours) and it records the whole time, but for some reason it will only play a portion of the recording. What do we need to do so we can watch whole recording?
Recording Will Not Play Fully
-
- Help
- Z10 SE
-
Kimmer -
February 26, 2024 at 10:12 PM
We asking all new users to read the articles below, before creating their first posting or thread.
- 4. Instruction Articles
Please note, in this forum are only English threads and postings allowed, without any exception!
Please follow the forum rules, thank you for your understanding.
-
Are you on XC connection?
If so go to settings in mol2 menu and set playbacklimit to off.
-
How do I find the MOL2 menu to switch playback time to off
I guess you have a IR-1 remote with your box?
The mol 2 menu button is located right next to the Home button,and has 3 horizontal bars on it.
Press this button and scroll to settings->Playbacktime->set too off
-
It was already on off
On what kind of connection are you (MAC or Stalker/XC or M3U)?
-
You should be able to find out by going to the Portal (mol2 menu-> connections) and check if you have Portal URL,login required,username & password,in that case you are on XC connection.
Other option is MAC-ID which is connection you make by sending your iptv provider your personal Mac number.
Did you buy your box with iptv provider already installed?
-
Yes I did and I don't have a MAC number
In that case i think you must be on XC connection,and in that case there should not be any playback limit,just try it out tonight witha 4 or more hours recording,and see if it works now for you
-
What device do you use for recording sd card,USB stick or external ssd/hdd?
Are you sure you formatted your recording device on your laptop or PC with Rufus tool?
-
I am using a USB stick and I didn't format it with Rufus
In that case you should format your stick according to "How to format......etc" in article section of Forum page(right next to Dashboard)
