Hello i have problem with my F3. When i try to flash image it doesn't flashed and after i have problem as below. Check videos. Nothing on front panel. Just ethernet ports blinks. No screen.
What can i do? RS232 can i use to solve problem?
Formuler F3 Problem
-
- Miscellaneous
- F3
-
mfox -
November 23, 2018 at 7:44 PM -
Closed
We asking all new users to read the articles below, before creating their first posting or thread.
- 4. Instruction Articles
Please note, in this forum are only English threads and postings allowed, without any exception!
Please follow the forum rules, thank you for your understanding.
-
- Official Post
Hi,
could you explain in short what happen exactly? Image install goes wrong or the box doesn`t react and you want to install the image again?
-
Hi,
could you explain in short what happen exactly? Image install goes wrong or the box doesn`t react and you want to install the image again?
Hi
I tried to install openatv image but it doesn't installed. So i plug out usb and tried to install bootloader. Then try to install again another image openpli. Now box is like this. Nothing on screen. Nothing writes on front panel. I tried several images still same. Just ethernetport blinks like on video. Possiblle to rescue from RS232 port or another solution?
-
- Official Post
No, there are no known tools or files for another solution.
I think the problem was the last bootloader install. Format one usb stick with Fat32 and tool "Rufus" and try again with bootloader install. If you are not able to update then your box need to be repaired.
-
No, there are no known tools or files for another solution.
I think the problem was the last bootloader install. Format one usb stick with Fat32 and tool "Rufus" and try again with bootloader install. If you are not able to update then your box need to be repaired.
I see. I Tried to format my usb and use Rufus tool. Try again to install bootloader again. But still same. Just ethernet port blinks. Nothing writes on front panel
-
- Official Post
Could you please try with other compatible power supply and see if the box show something? If not, then is your box damaged and need to be repaired.
