MYTVOnline 4 Beta Upgrade now available for Z12 Ultra

Quote from Clasimodo

Thanks for the prompt answer.pity that you cannot manually refresh everything at the same time. Maybe on the wish list?

You can setup auto refresh in mytvonline4 settings at a time when you want refresh it.

Don't know the exactly steps, but if there appears above in the menu a "refresh content" button and you presh ok. Then it refresh all, epg, live, vod and series.

It's in mytvonline settings somewhere and happens once a day.

If you can't find the option, i can tomorrow explain the right steps for you.

Issues found during testing:

Movie information does not always refresh correctly when moving to the next movie. I have seen the same issue reported by another tester (Svenne, Swedish language), but I also experience it with the Dutch language selected.

I experienced the bootloop issue that several users reported earlier. Solution was also posted, that worked for me

Audio issue (still present): When switching from a TV channel that broadcasts stereo audio only to a channel broadcasting AAC 5.1, the audio stutters/cuts out repeatedly for approximately the first minute. After about one minute the audio becomes stable and plays normally.

The issue only occurs when switching from a stereo channel to an AAC 5.1 channel. Once audio becomes stable, switching between AAC 5.1 channels works correctly. VLC and local multichannel content play normally on the same device and AVR.

My setup:

Formuler Z12

AV Receiver: NAD T758 V3i

Audio output via HDMI

AAC 5.1 channels affected

This issue was not present before installing the MYTVOnline 4 beta. The receiver switches correctly between PCM and Dolby Digital, also with other devices, so the problem appears related to the beta software's audio handling when changing audio formats.

In advanced audio options.. try switching off "Surround" setting...

I have had loads of issues with audio and surround systems.. My solution is to use a Toslink to RCA adaptor.. works well enough for me...

Quote from AFNGUY

In advanced audio options.. try switching off "Surround" setting...

I have had loads of issues with audio and surround systems.. My solution is to use a Toslink to RCA adaptor.. works well enough for me...

I have Surround sound Off

Will test with a Toslink

When following series and press pause,it often happens,that upon resume the serie jumps up to the next episode.

I have to go back to previous episode and manually correct it.

Quote from Clasimodo

Thanks for the prompt answer.pity that you cannot manually refresh everything at the same time. Maybe on the wish list?

yes thats a step back. from 3

**MOL4 Beta: Cloudflare Error 1010 on XC API connections (works fine in MOL3 / TiviMate / UHF)**

Hi all,

**Issue:**
MOL4 Beta fails to load content from my provider with Cloudflare Error 1010 ("banned browser signature" / Browser Integrity Check). The identical connection (same XC API credentials, same network) works perfectly on:

- MOL3 on Z11 Pro Max
- MOL3 on Z mini
- TiviMate
- UHF

It fails on:

- MOL4 Beta on Z12 Ultra
- MyTVOnline+ on iOS (identical 1010 error)

**What I've tested:**

- Changed the API User Agent to a Chrome desktop string → still 1010
- Confirmed the error occurs against two independent Cloudflare-protected endpoints, including a direct connection to the provider and connect to IPTV Editor— so seems it is not one server's firewall rule
- Switching users (IPTV Editor) changes the behavior (successful refresh) but I think that may be temporary.

**Analysis:**
Since the UA string makes no difference and only the new-generation apps (MOL4 / MOL+) are affected, the trigger appears to be the request fingerprint of the new network stack itself (TLS handshake / header set), which Cloudflare's default Browser Integrity Check is flagging. MOL3's stack passes the same check. Nothing user-configurable in the app can reach that layer.

This will affect MOL4 users on any Cloudflare-fronted backend, which is a large share of providers, so it seems worth addressing before the official release.

I can reproduce and send logs if necassary, just need to know how/where the logs are, and what you need.

Z12 Ultra, MOL4 Beta, wired Ethernet, US.

Thanks!

Quote from kmk

**MOL4 Beta: Cloudflare Error 1010 on XC API connections (works fine in MOL3 / TiviMate / UHF)**

Hi all,

**Issue:**
MOL4 Beta fails to load content from my provider with Cloudflare Error 1010 ("banned browser signature" / Browser Integrity Check). The identical connection (same XC API credentials, same network) works perfectly on:

- MOL3 on Z11 Pro Max
- MOL3 on Z mini
- TiviMate
- UHF

It fails on:

- MOL4 Beta on Z12 Ultra
- MyTVOnline+ on iOS (identical 1010 error)

**What I've tested:**

- Changed the API User Agent to a Chrome desktop string → still 1010
- Confirmed the error occurs against two independent Cloudflare-protected endpoints, including a direct connection to the provider and connect to IPTV Editor— so seems it is not one server's firewall rule
- Switching users (IPTV Editor) changes the behavior (successful refresh) but I think that may be temporary.

**Analysis:**
Since the UA string makes no difference and only the new-generation apps (MOL4 / MOL+) are affected, the trigger appears to be the request fingerprint of the new network stack itself (TLS handshake / header set), which Cloudflare's default Browser Integrity Check is flagging. MOL3's stack passes the same check. Nothing user-configurable in the app can reach that layer.

This will affect MOL4 users on any Cloudflare-fronted backend, which is a large share of providers, so it seems worth addressing before the official release.

I can reproduce and send logs if necassary, just need to know how/where the logs are, and what you need.

Z12 Ultra, MOL4 Beta, wired Ethernet, US.

Thanks!

Display More

Private dns changed at internet settings at bottom to quad9 9.9.9.9 or off?

Reproduce and sent logs please. Don't forget to write down logfile number here in forum.

Photo's should be nice too.

Goodday my friend.

Quote from Lucky133

Private dns changed at internet settings at bottom to quad9 9.9.9.9 or off?

Reproduce and sent logs please. Don't forget to write down logfile number here in forum.

Photo's should be nice too.

Goodday my friend.

Display More

Private DNS is off, but my Asus Router (Merlin) is configured for DoT to Quad9 for the whole LAN (https://on.quad9.net/ = Yes)

Logs Sent: Logfile = #0000001FF4442

Quote from Martificial

Issues found during testing:

Movie information does not always refresh correctly when moving to the next movie. I have seen the same issue reported by another tester (Svenne, Swedish language), but I also experience it with the Dutch language selected.

I experienced the bootloop issue that several users reported earlier. Solution was also posted, that worked for me

Audio issue (still present): When switching from a TV channel that broadcasts stereo audio only to a channel broadcasting AAC 5.1, the audio stutters/cuts out repeatedly for approximately the first minute. After about one minute the audio becomes stable and plays normally.

The issue only occurs when switching from a stereo channel to an AAC 5.1 channel. Once audio becomes stable, switching between AAC 5.1 channels works correctly. VLC and local multichannel content play normally on the same device and AVR.

My setup:

Formuler Z12

AV Receiver: NAD T758 V3i

Audio output via HDMI

AAC 5.1 channels affected

This issue was not present before installing the MYTVOnline 4 beta. The receiver switches correctly between PCM and Dolby Digital, also with other devices, so the problem appears related to the beta software's audio handling when changing audio formats.

Display More

HHave You tried switching the Z12 audio settings to Legacy Passthrough? The Z12 has some issues with the Dolby MS feature with new STB and IP boxes, but switching the audio surround settings to Legacy Passthrough fixed it for me.