Hi, keep getting " IPTV Launcher Has Stopped" on screen when i boot z7+ . It freezes there and i can't get out of that screen with any remote buttons. Any ideas ?
Getting " IPTV Launcher has Stopped " on bootup z7+
-
- Miscellaneous
- Z7+
-
Danester -
October 16, 2018 at 6:40 PM -
Closed
We asking all new users to read the articles below, before creating their first posting or thread.
- 4. Instruction Articles
Please note, in this forum are only English threads and postings allowed, without any exception!
Please follow the forum rules, thank you for your understanding.
-
- Official Post
Do you have inserted some USB or sd cards? Please remove all connected devices and test again. FW and MOL version should be up to date.
-
- Official Post
Did you done already factory reset under -> System ? If not please do it and reboot the box.
If you not able to get into home screen and system , please use our factory reset tool.
-
I getting the same issue, i tried everything to factory reset it, it just keeps on going to iptvlauncher has stopped. Any other way to reset it?
-
- Official Post
I getting the same issue, i tried everything to factory reset it, it just keeps on going to iptvlauncher has stopped. Any other way to reset it?
PM sent.
-
Même problème pour moi !!! Ce message revient sans cesse. Impossible de fermer le formuler 7z+ en validant la fermeture. Obligé de débrancher mais à l’allumage l'erreur revient.!!! HELP.
-
PM sent.
Hi - could you PM me too? I have the same issue
-
PM sent.
There's obviously more than one person encountering this problem is there any reason you can't post the information help required rather then sending pm's?
-
Hello, I wanted to share my experience with you. I have two formuler, Zx (1 year) and Z7 + (1 month), I never had a problem with the Zx and here in 1 month I already had 4 crashes and freeze with the Z 7+ while I am on the same subscription. I hope that the problem will be quickly solved by an update or other
Thank you
Small precision, I do not denigrate the product Formuler remains for me the best in his field
Nvaes
-
I am having same issues, please PM me.
IPTV launcher has stopped keep coming upon boot.
-
- Official Post
The source of the issue was found and patched by the developers.
A new firmware hotfix will be released this week (October 25th) to prevent the issue from appearing again.
If your set is already affected, you need to do a factory reset and then download the new hotfix when it is available to prevent the issue from reappearing.
-
How to do the factory reset? my unit is already affected
-
- Official Post
Please read this instruction -> Recovery instructions for “IPTVLauncher has Stopped” issue.
-
Can you PM me too
I am having same issues, please PM me.
IPTV launcher has stopped keep coming upon boot as well. Dreamlink T2
-
The source of the issue was found and patched by the developers.
A new firmware hotfix will be released this week (October 25th) to prevent the issue from appearing again.
If your set is already affected, you need to do a factory reset and then download the new hotfix when it is available to prevent the issue from reappearing.
I am having same issues, please PM me.
-
- Official Post
On Z7+ with latest Firmware?
-
Did'nt find any good reply for this problem...
Factory reset is done but I always have the same mesage after I chose the state 'IPTV Launcher has Stopped'. After this. Iptv launcher return to the beginning WELCOME(chose language)
Z7+. I used the factory-reset-tool-v1-zip ..
update.ird
Please help
-
Finally find the solution
I used a mouse for the configuration on and not the controller which made the application crash...!!!
-
- Official Post
Thx for feedback, wish all would report his solution so the other user can also have benefit.
Yes, this happens from time to time when user connect something that is not fully compatible. Therefore it is necessary (if this happens) first to unplug all other devices and reboot the box. Some incompatible apps (with active process in background) can be also reason for such behaviour.
