We asking all new users to read the articles below, before creating their first posting or thread.
Please note, in this forum are only English threads and postings allowed, without any exception!
Please follow the forum rules, thank you for your understanding.
Did you buy Formuler DVBT2 stick or which one exactly?
Ok thx. Did you install the latest available Firmware and Software for the box?
Insert your DVBT2 Stick connected with Antenna cable -> Start Mytvonline -> Go to Menu -> Check if you see DVBT entry.
It was not necessary to do factory reset. I will test it today and come back to you.
and what will you do
I tested the DVBT2 Stick on S Turbo and also my was not recognised. Reported this to Formuler and waiting for replay.
I will contact you in this thread when i get infos.
Sorry but i did mistake in post #4, it was guidance for Z boxes.
Insert USB Stick into the S Turbo -> Go to DVB Settings -> Service Search and set like on picture 1 -> Then into Terrestrial Search, set like on picture 2 and Start with Search.
Update your box to latest version.
Please check again if your box is updated to latest version:
Firmware Version : v1.7.29
MYTVOnline Version : v2.0.0
Home Menu -> Software Download
If updated, you can see the setting "Service Search". When the DVBT2 stick is connected and recognised, the setting "Terrestrial Search" will appear.
Yes it is possible but it would be nice to hear first about update on your box?
Please find someone who knows how to install such boxes and let him do the setup. Fact is the Box works fine with latest Software, see pictures. When all installed and recognised well, the Terrestrial Menu will appear and you can do your scan for local channels.
WARNING!
For proper functioning, the USB-T2 device must be connected to a device that is completely disconnected.
If you connect a USB-T2 to a device that is in the USB-T2 standby mode, it is not detected and the device will not work.
