Has not happened to me previously but since this update, when I start mol3 it sometimes will randomly jump back to the menu after just starting to load.
Official Firmware 11.2.12 and MOL3 11.2.37 update for Formuler Z11 Series released.
-
- Z11 Series
- Update
-
SAM -
February 19, 2024 at 9:16 AM -
Closed
We asking all new users to read the articles below, before creating their first posting or thread.
- 4. Instruction Articles
Please note, in this forum are only English threads and postings allowed, without any exception!
Please follow the forum rules, thank you for your understanding.
-
-
How doo you report log
-
All the suddenly mol3 just shut down (restarting) ...Anybody else has the same problem? ...it goes back to homescreen.
Did unistall and install app again and worked since i last posted but today it started again!
Cant uninstall/reinstall all the time!!
Junk fw or box? It did start with latest fw update.
No usb connected!
Sent logs
Tracking :00000016C2017
-
Please send Log. and post the Tracking No.
Sorry did that! Its in my last post
-
Reboot the Box once and if it happens again, do it please again. We need more log`s in this case.
Did reboot but no difference did it first before sending logs etc...so you need two reboots? 🤣
-
Just send when it happen again..
00000016C2017 did double reboot but same...
-
Have now made several recordings.
Two consecutive recordings on the same channel.
E.g. 20.00-22.00 recording 1h59m57sec
Next recording 22.00-22.50 recording 59 sec.
On both occasions, the second recording is only 59 sec.
Do I have to change the second recording so that it starts later?
On one occasion it jumped back to the Formulas menu and I have to start mytconline3 again. -
Try with 3 Min later, because the box must end first with save of the first recording, maybe here happens the interrupt.
Have now tested.
2 minutes is too short.
3 min between recordings it works. -
This has happened a few times.
When I check for any updates and then go back I get a black box.
The three bars on the top right are not displayed.
On reboot it works again.
Has this error been reported? -
Display More
- in mytvolnine 3 Channels encoded in H265 are "slowed" (as if they were in 10 fps)
- In tivimate are perfect
- In xciptv..with exoplayer slowed. With vlc perfect
I have tested in xiaomi mi stick...perfect in xciptv with exoplayer or vlc
Edited: with mytvoline+ in my mobile is perfect too.
I have 2 formuler z11 pro max. Same problem in both
Tested in anither z11 pro max. Same issue
-
- in mytvolnine 3 Channels encoded in H265 are "slowed" (as if they were in 10 fps)
I’m getting the same problem but not all the time. If I use a different player the vod plays as it should
-
Is there a new update as there’s no mention of it on here but I’m getting a notice on my z11 pro max that there is one ?. As of today 10th may
-
Is there a new update as there’s no mention of it on here but I’m getting a notice on my z11 pro max that there is one ?. As of today 10th may
Yes ,there is a new update,just install and read the changelog.
