I see an updated BETA has been released….
Yes it is back online with some little changes since 2-1-26
Beta Firmware 12.10.06 update for Formuler Z12 released.
-
- Update
- Z12 Ultra
-
SAM -
December 1, 2025 at 1:23 PM -
Closed
We asking all new users to read the articles below, before creating their first posting or thread.
- 4. Instruction Articles
Please note, in this forum are only English threads and postings allowed, without any exception!
Please follow the forum rules, thank you for your understanding.
-
-
SAM Does this update fix Nordvpn connection issues on certain protocols
-
SAM Does this update fix Nordvpn connection issues on certain protocols
No yested yet...
Temporary Fix Nordvpn:
choose protocol Nordwhisperer or OpenVPN TCP.
And postquantumencryption OFF!
-
No yested yet...
Fix: choose protocol Nordwhisperer or open udp
Thanks lucky133
Yeah, nordwhisper is the only stable connection that I use, I hope a fix is imminent
-
Thanks lucky133
Yeah, nordwhisper is the only stable connection that I use, I hope a fix is imminent
There was a update yesterday from nordvpn. Didn't tested it yet.
Im testing now 7 new portals.
After that, i test nordvpn.
Edit 1: gonna test it now NordVPN version 8.28.0 with automatic protocol etc.
Edit 2: No connection with internet after 30 minutes!
Now testing with post encryption OFF. but automatic protocol on. If that fails, then back to nordwhisperer or openvpn tcp
Edit 3: still not working after some minutes.
Edit 4: Fixed like the very first time.
Back to NordWhisperer protocol or Openvpn tcp protocol.
Then it's fixed.
Will contact Nordvpn, maby it's there bug.
-
So glad you guys have your eye on the NordVPN issue. On my 500 mbps connection I get some great speeds of around 400 meg, while Surfshark and Proton give me around 120. But it disconnects and has trouble reconnecting.
-
I also had problems with disconnecting (wifi) with Nordvpn,they advised me to switch to TCP(Open vpn) protocol,since then problem was resolved.
-
I also had problems with disconnecting (wifi) with Nordvpn,they advised me to switch to TCP(Open vpn) protocol,since then problem was resolved.
Yes, but they don't still have a fix for Android 12? It works with other protocols.
I'm emailen them today
-
Seems to be fine on my end. Using NordVPN but with a wired connection.
using nordlynx protocol with everything enabled other than post quantum encryption -
Seems to be fine on my end. Using NordVPN but with a wired connection.
using nordlynx protocol with everything enabled other than post quantum encryptionThat should give also problems after 30 minutes or so.
Reproduce: push house button on remote. Open other app. Disney+ or so. Then go back and zap channels. Mosselen direct but sometimes after a while.
Last time i watched movie feom 2 hours. After 1.10 hours it stopped.
I did going back to channels and all were black on my 7 portals.
Changed to nordwhisperer or openvpn and rebooted and never had problem again.
-
I’ve installed the latest beta update and since then when I select the display mode in screen resolution to auto it seem to lock it in 4k 60hz and play everything in that. It seems auto doesn’t work anymore.
-
I’ve installed the latest beta update and since then when I select the display mode in screen resolution to auto it seem to lock it in 4k 60hz and play everything in that. It seems auto doesn’t work anymore.
At my side its always on auto.
But it's a beta update and thats why the warnings are for. Beta versions are not final versions, and can have errors for some users.
Make backup of mytvonline3 with usb from mytvonline 3 menu.
Factory reset box.
Import mytvonline3 backup and go.
Goodluck my friend
-
I’ve installed the latest beta update and since then when I select the display mode in screen resolution to auto it seem to lock it in 4k 60hz and play everything in that. It seems auto doesn’t work anymore.
I had this once after installing the beta. I first recognized it, because the Z12 only send 30hz to my TV no matter what app or source was playing. I checked settings and it was still on auto. Changing the format to anything else went instantly back to 4K 60hz. I did a restart of the Z12 and since then it didn't happen again.
-
I have the same problem; the automatic frequency no longer works correctly, and I also have to do it manually.
-
Will check it too to reproduce
-
- Official Post
I have the same problem; the automatic frequency no longer works correctly, and I also have to do it manually.
couldn't reproduce on my end. Could you let me know the TV brand and model name?
-
couldn't reproduce on my end. Could you let me know the TV brand and model name?
Hello,thanks,It's not a big-brand TV, it's a Clayton CL65QUHDSW25B.
Before, I had a 42-inch Xiaomi 4K TV and it was the same; I always had problems with the channels in general, especially...
-
- Official Post
Hello,thanks,It's not a big-brand TV, it's a Clayton CL65QUHDSW25B.
Before, I had a 42-inch Xiaomi 4K TV and it was the same; I always had problems with the channels in general, especially...
If possible, could you try to reproduce the issue and send logs?
Make sure to let me know the tracking number for the logs before sending it.
-
If possible, could you try to reproduce the issue and send logs?
Make sure to let me know the tracking number for the logs before sending it.
Hello, yes of course, I'll do that tonight after work. Should I send the logs privately with the tracking number?
-
Please excuse me, I posted in the wrong section.
-
couldn't reproduce on my end. Could you let me know the TV brand and model name?
I’ve got a Hisense 43A7NQTUK. It’s seemed to be fine up until I installed the beta.
-
Display More
At my side its always on auto.
But it's a beta update and thats why the warnings are for. Beta versions are not final versions, and can have errors for some users.
Make backup of mytvonline3 with usb from mytvonline 3 menu.
Factory reset box.
Import mytvonline3 backup and go.
Goodluck my friend
Cheers mate, yeah completely understand that I just wanted to let someone know in case it’s a common fault. Wasn’t to sure where to post tbh.
-
Please excuse me, I posted in the wrong section.
Can happen my friend.
But you use Nordvpn and you use a Z12 Ultra box? If that's the case....
Open NordVPN and go to settings.
Then select automatic connection on all networks.
Then select automatic connect with "standard vpn" and then fastest server or your homecountry France.
Turn postquantum encryption OFF!
At protocol section select NordWhisper or OpenVPN TCP.
Reboot box and then it's fixed i hope.
-
I’ve installed the latest beta update and since then when I select the display mode in screen resolution to auto it seem to lock it in 4k 60hz and play everything in that. It seems auto doesn’t work anymore.
I changed from "auto" to 4k-qms 23-60hz.
Start mytvonline3 and play channels.
I go back to screen resolution and it stand still on 4k-qms-23-60hz.
I start mytvonline3 again. it plays ok.
i go back to screen resolution in android settings and change from 4k qms 23 60hz to auto.
So all fine.
-
Display More
I changed from "auto" to 4k-qms 23-60hz.
Start mytvonline3 and play channels.
I go back to screen resolution and it stand still on 4k-qms-23-60hz.
I start mytvonline3 again. it plays ok.
i go back to screen resolution in android settings and change from 4k qms 23 60hz to auto.
So all fine.
Do you have an LG or Samsung TV from 2023 that displays the QMS in the resolutions?
This is not the case for our colleague, and it changes everything because the QMS greatly assists with frequency adaptation
-
Do you have an LG or Samsung TV from 2023 that displays the QMS in the resolutions?
This is not the case for our colleague, and it changes everything because the QMS greatly assists with frequency adaptation
Lg 2023 55qned866r
And yes, qms is a great change. But if tv not support it, you see 2 seconds black screen. that's annoying
-
Lg 2023 55qned866r
And yes, there is a change. But if tv not support it, you see 2 seconds black screen.
This is not the only difference.
The QMS also helps to maintain the right frequency regarding content on applications that do not natively support AFR, such as Amazon Prime, for instance, or other legal streaming applications from certain TV channels.
It can help here.
You should disable the QMS in the webOS settings of your LG TV to test it properly.
Unfortunately, I no longer have a Z12 Ultra, so I can't test it on my end.
-
- Official Post
Hello, yes of course, I'll do that tonight after work. Should I send the logs privately with the tracking number?
I’ve got a Hisense 43A7NQTUK. It’s seemed to be fine up until I installed the beta.
Please let me know if AFR setting is enabled on your MYTVOnline 3 > Player settings.
After sending the logs, pleaes try to reboot the device and see if the issue remains.
Let me know the tracking number for the logs - it should be shown on the send logs page.
-
Please let me know if AFR setting is enabled on your MYTVOnline 3 > Player settings.
After sending the logs, pleaes try to reboot the device and see if the issue remains.
Let me know the tracking number for the logs - it should be shown on the send logs page.
Hello, I've fixed my problem. It was something really simple: my television doesn't seem to handle frequency changes well. I set it to 50 Hz and now the channels are perfectly smooth. I left the AFR (Analog Frequency Response) on the VOD service.
-
Hello, I've fixed my problem. It was something really simple: my television doesn't seem to handle frequency changes well. I set it to 50 Hz and now the channels are perfectly smooth. I left the AFR (Analog Frequency Response) on the VOD service.
Like in said before.
Tv must supports it😉
But well done my friend.
Good job!
-
Hello, I've fixed my problem. It was something really simple: my television doesn't seem to handle frequency changes well. I set it to 50 Hz and now the channels are perfectly smooth. I left the AFR (Analog Frequency Response) on the VOD service.
What is Analog Frequency Response?
Is it a setting on your tv?
AFR on formuler box stands for automatic frame rate
-
What is Analog Frequency Response?
Is it a setting on your tv?
AFR on formuler box stands for automatic frame rate
It's a low-end television, my real television is broken, so I set it to 4k50hz afr off on channel and on on vod, I couldn't get better, is there an application like smooth motion?
-
What is Analog Frequency Response?
Is it a setting on your tv?
AFR on formuler box stands for automatic frame rate
Hello, very bad translation
-
Like in said before.
Tv must supports it😉
But well done my friend.
Good job!
Normally yes, but when you turn on AFR on the channels, it switches to 50Hz or 23.469Hz. The problem is really with the TV; it's low-end, with no resolution or even frequency settings.
-
Normally yes, but when you turn on AFR on the channels, it switches to 50Hz or 23.469Hz. The problem is really with the TV; it's low-end, with no resolution or even frequency settings.
50hz are mostly european channels and 23 or 24 hz usa channels.
Did you know that my friend?
-
50hz are mostly european channels and 23 or 24 hz usa channels.
Did you know that my friend?
No, I didn't know that, thank you for the information.
-
No, I didn't know that, thank you for the information.
In nord america/canada/Japan and they have NTSC signal. It's 60hz at 30 p/s images.
In europe whe have PAL at 50hz with 25 images p/s.
Not so important, but then you know it😉
-
When I search for a channel and then select it happens that MyTvOnline3 restarts.
This part has never happened before the latest version.
Unable to delete individual recordings. -
I have a new official update!
-
I have a new official update!
12.10.06 is the latest one I have installed.
Which version do you mean?
