BETA FW 10.10.45 and MOL2 10.10.45 Update.

BETA Software Update for Formuler Z10 Series devices.

Firmware: 10.10.45 BETA

MYTVOnline 2 : 10.10.45 BETA

WARNING:

Software cannot be rolled back after installation.

If serious errors occur, please do factory reset.

Please keep in mind, this is Beta and could have also bugs or act unstable, it is for testing and not for productive use 24h with the box.

If you don`t want to test, please wait until official comes out. No Forum support in other threads if beta is in use, beta issues should be discussed only in this thread.

HowTo Install:

Home Menu -> Software Update -> press "1339" -> Red Icon and Beta Test SW appear (right corner) -> Press Red Button -> Firmware and Software are now shown, press "OK" button for install.

The install process and reboot works automatically! Please don`t turn off the box or plug out the power supply, could damage the box. The reboot after update needs always much longer than usual, please be patinate and let the box finish the install. If necessary reboot later once again.

BETA FW 10.10.45 + MOL2. 10.10.45 discussions only in this thread here. Other open threads with Beta issues will be deleted instantly!

We need to collect data and feedbacks on one place, thank you for your understanding.

Change Log

Firmware Version : 10.10.45 BETA

• NEW: Ethernet link-speed information on home screen
• FIX: "Wi-Fi network didn't accept connection" on Hitron routers
• FIX: Recording files deleted after uninstalling the app
• FIX: Stuttering playback in Disney+
• FIX: Device reboots to recovery mode sometimes
• FIX: Launcher crash loop
• FIX: Hotspot doesn't work on Z10 SE sometimes
• FIX: Front LED doesn't change color on wake-up sometimes
• FIX: System hangs when formatting large-capacity disk drives
• Bug fixes, optimizations, and performance enhancements

MYTVOnline 2 : 10.10.45 BETA

• FIX: Series > Episode display issue
• FIX: m3u channel name parsing issue
• FIX: Unable to play certain VOD contents
• FIX: Freezing on some HLS streams
• FIX: Lip sync issue on some contents
• Bug fixes, optimizations, and performance enhancements

Quote from SerGoy

Hard reset

No, the box is not online (exclamation mark in home menu?) or update server is blocked.

Try with VPN on.

The info button counts as a manual interaction, so here the OSD is switched off in sec.

Example OSD settings: If it were coupled with the OSD settings, the setting is e.g. to 5sec. set, then in many cases it would not be possible to read all the data before the OSD closes.

You know it very well, for OSD in normal Live TV use when you change the channel and do not jump in with some button pressing. Channel Change -> OSD shown and disappear if you didn`t press anything. Channel Change -> OSD is shown, if you press now something, the box waits for your input ( means the automatic closing is stopped).