MOL3 11.1.70 Hotfix update for Formuler Z11 Series released.

This is my 4th formuler box. This refresh contents features is a huge ddisappointment. The z8 method is so much better.

i have no sound have to reboot every time

Quote from mustang12

Ich habe keinen Ton, muss jedes Mal neu starten

me too

Quote from 175n

Turn off "Auto Volume Level" or "Volume Normalizer" in your TV's settings.

Thanks for the answer, but that is also not possible, the tv does not have that option. And also, alot of times coming from standby theres no sound on the box, and only after a restart the sound comes back on...

i think i already said this, sory.

Thanks alot

Quote from 175n

See if the volume comes back if you press the VOL +/- buttons

I have the same problem, and find that by pressing one of the volume buttons will bring back the sound, as indicated above.

Quote from 175n

See if the volume comes back if you press the VOL +/- buttons

Yes this solves the problem for me on both problems, today i experience the same problem again ox volume fluctuations, from one moment to oder, the volume was very low, and just with the touch of the volume key it came back to the original volume, and again, after restart from stand-by, was no sound, and after touching the remote volume key, it came back on..

Thanks

Quote from Sergei

Thanks for the answer, but that is also not possible, the tv does not have that option. And also, alot of times coming from standby theres no sound on the box, and only after a restart the sound comes back on...

i think i already said this, sory.

Thanks alot

EXACT the same for me it works some times not every time i have sound from ampfiler z7 z8 z10 works not z11

good morning I noticed a problem that had with previous versions and that had been resolved when you put a long pause on a series or films, when you put it back on play the film stops as if it were finished and on the series starts on the next episode

Aslo have the sound dropouts . Pushing +/- doesnt resolve it. Only a reboot. Happens once or more a day

Quote from henkie

Have you tried settings for automatic epg update in content manager,maybe it is set for 6 hours interval?

Try set the automatic update interval at 24 hours,it works for my XC connection,maybe it will work with Stalker.

THX but didn't solve the problem.

If you use timeshift and press the left directional button on your remote, it goes back to the beginning when it started recording ( when you first entered that channel) In the past it just skipped back 10 seconds (depending on the skip setting). You can't go forward like you could in a vod using the slider. The slider doesn't go forward like it used to in mol2, it does respond on the 10sec forward but the slider doesn't move so you don't know where you are. Mol2 you could see it due to a different color of Grey (light Grey showed you how far you are from live) . There is one good improvement though (and a little work-around). If you've configured fast forward button on your remote it doesn't skip forward in time, it actually fast forwards with a certain speed (2x, 4x 8x). If you press play it doesn't actually start but it pauses, after a second press of start it resumes it. Also one thing that's good compared to the z10 is that it actually goes to the end of the recording and doesn't freeze If you go to far.

2nd issue I've noticed. Settings > display and sound > screen resolution. After a reboot everything is set back to auto mode. In my case I need to put everything back to 12bit (this was a known issue of the z10).

Vod & TV series it doesn't save the sort order. Also there's no sort order available in favorites. I'm loving the new layout though! Especially the search option! SEARCH ALL, THANK GOD FOR THAT! And now all favorites are put together, no more connecting to a different provider!! Would still be handy to use directional left to manually select a provider, because all groups are now on one list. I've got 3 providers and there's a lot of groups. You actually did it in the radio list... Press groups, press left goes to provider and you can fine tune and select provider and browse the groups of just that provider (using directional right) . I've noticed on bottom right the provider name which is good. I'll put a few things as a request for new, feature in another thread

Other small thing, if you've set content manager > data sync > auto update settings. If it runs the notification Always says New content has, arrived, press refresh in the main menu... This isn't always the case because the menu doesn't give that option because there isn't always new content.. Would also be nice to immediately refresh from within the notification.. Use color button on bottom right with "refresh contents"

Quote from mustang12

i have no sound have to reboot every time

Same Prob here. Volume Up isn't helping any more. Figured out by pressing the 3 Dots Button at bottom will unmute sound.... 🤔

Quote

Quote from Staff

Screen resolution - Please provide a video that shows the exact issue for further investigation. You can upload the Image/Video file here: https://streamable.com/ > Upload file > Copy link > Paste the link with your reply

This is what I meant, after you reboot the machine everything is set to auto again. I need to change it back to 12bit

Quote from Staff

Sort order - It's a known issue, an update will fix this

Notification - It's a fixed string for each refresh. Most portals provide new content on each update.

About the notification. Can there be an option in the refresh menu that you can automatically refresh everything. I can't imagine I would decline new content

I also found in the history menu of vod that it doesn't put the last played series on the top. I dotn need a sort option there. From an ux perspective an user would expect it to start the list with the last played. I've made a screenshot of it.

Quote from Yorick

Other small thing, if you've set content manager > data sync > auto update settings. If it runs the notification Always says New content has, arrived, press refresh in the main menu... This isn't always the case because the menu doesn't give that option because there isn't always new content.. Would also be nice to immediately refresh from within the notification.. Use color button on bottom right with "refresh contents"

Good idea 👍 will make things that bit easier.

hello, do you know if they work for the next update of the Z11 that the updating of the servers takes place at the start of mol3 as on the previous box formulate Thanks

Quote from henkie

Hi,since the update i get infrequently "an error occurred:Illegal Argument Exception",there is a 5 times retry effort and then it reads ""

try again later",its almost always on the same live tv channel.

I could not find anything in search option!

Does anyone have the same error and what does it mean?

I also have this error on z11 pro even after factory reset (recovery mode). Had the same error last year on z10 pro..after hotfix update this was resolved. Hopefully this also will be resolved after hotfix update z11 pro.

Anyone else having issues with the refresh of channels when they are available according the app?

Just reloaded and I still don’t get the new channels.

In my iPhone app, the channels are up to date.

When an update content runs the complete mytv app gets unresponsive. This is particularly annoying when starting up in the night any volume is normal and the system doesn’t respond to vullen down for 10 seconds .

It’s producible since it’s every time on every of my 6 boxes I have when the automatic content grab runs

thank you for your answers I activated my subscription by password identifiers and http //premium

Quote from Staff

Timeshift - Make a recording of the channel and check if the stream is recorded correctly. Also check if you get the same error on other channels. We've tested multiple channels but none of them showed what you said using local timeshift

If you enter a channel it starts recording that channel, even if you don't use pause. In mol2 you can go back in time everything from the time you entered that channel using the left directional button on your remote. To reproduce... Enter a channel... Let it play for minutes. Press directional left, it shows the seek bar empty. Press again on directional left to go back. In mol2 it would go back a minute in time. Since mol3 it goes back all the way back to the beginning when entering that channel.

1st picture I'm uploading shows how it was in mol2

The seek bar shows how far you're into the recording (red)... The gray area shows how far you can skip ahead until you're live.

2nd picture shows how it is in mol3. When you enter the channel and time progresses it records on your microsd or usb(whatever you use). If you press directional button left to get back in time the seek bar looks like shown in this picture:

The seek bar is empty and if you press directional button left again it skips back all the way back when you entered the channel and not a minute (depending on your skip setting).

Hi folks, first post on this forum so apologies if I'm doing anything wrong.

I got a Z11 promax about 2 weeks ago and so far I'm loving it.

One issue tho, I was able to pause/rewind live TV on the MYTVOnline app but somehow it's just disappeared, if I hit pause, nothing happens, I can't seem to change the player for live TV so I don't know if it was something I did or maybe an update took it away?

Anybody know what could be wrong?

Thanks.

Quote from Redred

Hi folks, first post on this forum so apologies if I'm doing anything wrong.

I got a Z11 promax about 2 weeks ago and so far I'm loving it.

One issue tho, I was able to pause/rewind live TV on the MYTVOnline app but somehow it's just disappeared, if I hit pause, nothing happens, I can't seem to change the player for live TV so I don't know if it was something I did or maybe an update took it away?

Anybody know what could be wrong?

Thanks.

Add storage and turn on timeshift in settings within mol3.

Thanks, I had all that done but i think the usb might have been removed at some stage so maybe that had something to do with it.

I turned off timeshift and then back on and it's working again.

Cheers.