- Official Post
Does your TV work with other device on same HDMI port?
Did you try with other TV or Monitor?
Unplugged everything from Z7+, SD Card/USB etc.?
We asking all new users to read the articles below, before creating their first posting or thread.
Please note, in this forum are only English threads and postings allowed, without any exception!
Please follow the forum rules, thank you for your understanding.
Does your TV work with other device on same HDMI port?
Did you try with other TV or Monitor?
Unplugged everything from Z7+, SD Card/USB etc.?
So it is not just me who had this problem. Something happened with the resolution as I tried almost every singe setting on this. With no results.
If I knew this was going to happen with the upgrade I would not have upgraded it.
hdmi not showing i put the file on usb while pressing the ch .. button notheing happen
How old is your TV?
Norton13, you told somewhere you have new 4K TV, does the box work on this and not on the old tv?
Did you try with factory reset?
Does your TV work with other device on same HDMI port?
Did you try with other TV or Monitor?
Unplugged everything from Z7+, SD Card/USB etc.?
I guess you do not know with this upgrade that something has changed wit the resolution.
Norton13, you told somewhere you have new 4K TV, does the box work on this and not on the old tv?
Did you try with factory reset?
I do not have the TV yet it works with a computer monitor so I am pretty sure it will work with the new TV. I tried even a brand new cable which I knew was not the problem. Every resolution setting would not work on my old TV. I did a factory reset as well which did not work.
I guess you do not know with this upgrade that something has changed wit the resolution.
What you want to say with this?
This have changed:
Quote[SYSTEM] FIX: Display Resolution button doesn't show resolution selection window
[SYSTEM] IMP: Display resolution selection window only shows compatible resolutions
I was not planning on buying a new tv but since this happened water under the bridge.
What you want to say with this?
This have changed:
I read this it worked for 2 minutes then as soon as I hit the resolution button again no signal whatsoever. Not sure why but that is the case.
I am not new at this but not sure why it will not see the signal. Since I am getting a new TV the problem will be solved.
As far as the resolution it went up to 1080P which use to work before the upgrade.
Norton13, you told somewhere you have new 4K TV, does the box work on this and not on the old tv?
Did you try with factory reset?
The hdmi delivered with the box is a hdmi 1.4 cable i thought.
Did you try it with a hdmi 2 or 2.1 cable?
As far as the resolution it went up to 1080P which use to work before the upgrade.
That resolution works most time.
Only on some older tv's not, they have 1080i
iav got another formulor that works ok .my tv is sumsung not smart the other box works no prob....the box at the min is on stanby..when i press power it goes green but no signal on tv .defo the updat as done it it
I am not new at this but not sure why it will not see the signal. Since I am getting a new TV the problem will be solved.
Do you have the new tv already?
Or this week
I spent hours with the settings changed all the cables also different ports. Tried other devices that worked so I am not sure what happened on this upgrade.
I spent hours with the settings changed all the cables also different ports. Tried other devices that worked so I am not sure what happened on this upgrade.
Can you confirm you also tried hdmi 2.0 cable or 2.1 cable?
Thx
Do you have the new tv already?
Or this week
I will have the new tv next week.
thought it was ment to make it more stable .but instead its done sum thing to resolution
and u cant do a usb update on it because the tv dosnt recognise the box
iav got another formulor that works ok .my tv is sumsung not smart the other box works no prob....the box at the min is on stanby..when i press power it goes green but no signal on tv .defo the updat as done it it
You have also tried to disconnect power for 30 seconds?
Then tv on
Then connect hdmi to tv
Then connect power to formuler?
Then hdmi to formuler
OK, could you two open new Support Ticket "No HDMI Signal" with detailed explain inside, since all mentioned not helps.
Please insert all data, fw and sw version. What have you try until now and not to forget name of tv and how all is connected.
thought it was ment to make it more stable .but instead its done sum thing to resolution
and u cant do a usb update on it because the tv dosnt recognise the box
Do you have a friend in neigbourhood where you can use his tv for test?
Maby more luck
iav got 3 tvs..... 2 sumsung and a hitachi
You have also tried to disconnect power for 30 seconds?
Then tv on
Then connect hdmi to tv
Then connect power to formuler?
Then hdmi to formuler
Can you confirm you also tried hdmi 2.0 cable or 2.1 cabthe new
The new cables do not say. But the old cable works on my computer monitor.
Done all of that.
Since I will be getting a new TV no point for me to start a support ticket. My tv is old but it did work before the upgrade.
Can it be a wrong HDR setting?
What makes this error.
Auto or dolby or sdr
Or maby the colorsettings.
European tvs have rgb collours i though.
Others ycbr? (Or whats fhe correct name)
Since I will be getting a new TV no point for me to start a support ticket. My tv is old but it did work before the upgrade.
thats clear for me.
I hope a new tv solves the problem for you my friend.
wonder how many more boxs or done in because off this update is there no reset button inside the spdif hole
thats clear for me.
I hope a new tv solves the problem for you my friend.
I went through all of the resolution settings as well as the advanced settings to no avail. I Know the new TV will solve the problem which I was not going to buy. Not sure what it is but the upgrade changed something for the resolution not to work on my older TV.
Display MoreCan it be a wrong HDR setting?
What makes this error.
Auto or dolby or sdr
Or maby the colorsettings.
European tvs have rgb collours i though.
Others ycbr? (Or whats fhe correct name)
I went through all of this.
thats clear for me.
I hope a new tv solves the problem for you my friend.
I know it will but there is something on this upgrade. I do not no but their is some kind of issue.
I went through all of this.
You didnt change nothing on you tv?
No hdmi settings?
Like hdmi deep collour, port setting for collours or something else?
Can You give it a try to factory reset your tv? (With al hdmi cables and audio cables disconnected from tv)
Only power cord on tv
Oh no... You tried different tvs and monitor so mine anser wasnt helpfull.
Sorry
It is an old TV component there are no settings. Long story short HDMI to component works tested on Blue ray as well as the component cables. Everything works tested with all of the cables HDMI works on blue raty HDMI cable works.
Oh no... You tried different tvs and monitor so mine anser wasnt helpfull.
Sorry
Different monitor works no problem.
So the signal will not work on the HDMI converter. Which worked before & still works as tested on blue ray.
It is an old TV component there are no settings. Long story short HDMI to component works tested on Blue ray as well as the component cables. Everything works tested with all of the cables HDMI works on blue raty HDMI cable works.
😂😂😂
Funny, looking on a old tv with a converter.
You make me smile my friend haha.
Ontopic: you are 100% right! Strange that it worked before the update