We asking all new users to read the articles below, before creating their first posting or thread.
Please note, in this forum are only English threads and postings allowed, without any exception!
Please follow the forum rules, thank you for your understanding.
There's an option in developer options (scroll to the bottom and select others) that not everyone will find as some people just plug and play
HDMI 2.0 delivers 50 to 60 fps compared to the default setting of HDMI 1.4 which is around 24 fps
My picture quality improved quite a bit choosing HDMI 2.0, especially with UHD on YouTube
I hope this helps a few other people 
can you explain where you find this option, I do not see it Thanks
Go to Settings > Device preferences > About >
scroll down to 'Build' and hit the ok button 7 times
Now go back to device preferences and developer options will be listed
Created new label for such Threads (hints & tips).
Please continue with creating such threads to help other users
Also. Within developer menu.
If you go to the bottom and click “Advanced”
Then locate Performance Mode and toggle on “Maximise CPU performance”
Basically Android mobiles have this toggled off to save battery life so it juggles the cpu usage to cater for such.
Android TV boxes don’t need to optimise battery and therefore the whole cpu performance can be used.
Toggling the above setting on, you’ll see an increase in device speed particularly at boot up.
do you know if it's the same on the Z10 or other Formuler Thanks
Yes, on z10 can be found under others.
@All who want to change something:
Very important is not to change in developer mode something what you not know or was not suggested from others who tested enough. Some changes can make the box unstable.
do you know if it's the same on the Z10 or other Formuler Thanks
Should be same on Z10, only way to see for sure is enter developer mode and seek the options mentioned above.
do you know if it's the same on the Z10 or other Formuler Thanks
Screenshot from Z10 Pro Max 
Display MoreThere's an option in developer options (scroll to the bottom and select others) that not everyone will find as some people just plug and play
HDMI 2.0 delivers 50 to 60 fps compared to the default setting of HDMI 1.4 which is around 24 fps
My picture quality improved quite a bit choosing HDMI 2.0, especially with UHD on YouTube
I hope this helps a few other people
This option doesn't do anything. It is related to the HDMI Rx (Receiving/INPUT) port that is not installed on your device.
Your device only has 1 HDMI TX (Output) port.
Yes, on z10 can be found under others.
@All who want to change something:
Very important is not to change in developer mode something what you not know or was not suggested from others who tested enough. Some changes can make the box unstable.
How i find others? i cant find it on my z10 pro max
How i find others? i cant find it on my z10 pro max
I believe Sam mentioned “others” in context of other members providing tips and tricks. Not an actual setting named “others”
I believe Sam mentioned “others” in context of other members providing tips and tricks. Not an actual setting named “others”
But if u check Marchellas pics there is an option others
But if u check Marchellas pics there is an option others
Sorry, my apologies, I thought you were referring to Sams post as you quoted it.
Aside from that, yes there is an option for “others” within the developer menu for Z11 series, however I’m not sure of that in the Z10 series.
Have you entered developer mode? If so and the others option doesn’t appear, it’s likely that isn’t available.
Sorry, my apologies, I thought you were referring to Sams post as you quoted it.
Aside from that, yes there is an option for “others” within the developer menu for Z11 series, however I’m not sure of that in the Z10 series.
Have you entered developer mode? If so and the others option doesn’t appear, it’s likely that isn’t available.
Marchella shows screenshots from z10 pro max and it shows others, but i cant find it, how i enter to developer mode?
Marchella shows screenshots from z10 pro max and it shows others, but i cant find it, how i enter to developer mode?
Ok to enter developer mode do the following:
Formuler Home Screen > Settings > Device Preferences > About
Locate “Build” and press to select that 7 times and developer mode will be activated
Then exit back to Device Preferences and scroll almost to the bottom of the list and you’ll see Developer Options
Ok to enter developer mode do the following:
Formuler Home Screen > Settings > Device Preferences > About
Locate “Build” and press to select that 7 times and developer mode will be activated
Then exit back to Device Preferences and scroll almost to the bottom of the list and you’ll see Developer Options
Thank u
"Others" can be found as last menu entry, just scroll down.
Ok to enter developer mode do the following:
Formuler Home Screen > Settings > Device Preferences > About
Locate “Build” and press to select that 7 times and developer mode will be activated
Then exit back to Device Preferences and scroll almost to the bottom of the list and you’ll see Developer Options
Hi again. Do u know if its possible to do on z8 also?
Hi again. Do u know if its possible to do on z8 also?
I think everyone should read this again:
This option doesn't do anything. It is related to the HDMI Rx (Receiving/INPUT) port that is not installed on your device.
Your device only has 1 HDMI TX (Output) port.
I think everyone should read this again:
On my z10 pro max i got better image after that
Just wanted to make my first post by saying I just received my Formuler Z11 Pro Max about 3 days ago and I absolutely love this device. I purchased a Buzz X5 a couple months ago and this will replace it with flying colors. Also I have to say Quevega, thanks for that above post. I personally found a huge difference when streaming 60fps video.
Hi guys can someone help me how to access PQ Settings on a Z11 pro max? I tried the method for Z8 pro and it didn't work.
PQ Settings only on Hisilicon chipset available (like z8 series), Z10 and Z11 have Realtek chipset and no PQ Settings.
Hi guys can someone help me how to access PQ Settings on a Z11 pro max? I tried the method for Z8 pro and it didn't work.
Android Settings > Devices Prefs. > Display & Sound > Image Settings
Went
Android Settings > Devices Prefs. > Display & Sound > Image Settings
Went there and it's just Contrast, Saturation, Brightness and Hue settings, but they are all at 51% by default, is that normal behaviour?
Went
Went there and it's just Contrast, Saturation, Brightness and Hue settings, but they are all at 51% by default, is that normal behaviour?
I noticed this too. Very curious to know if this should be 50, or if someone with a professional calibrated tv can find optimum settings.
Set first 3 options to 50 and Saturation to 48-49 to have realistic skin colour.
Set first 3 options to 50 and Saturation to 48-49 to have realistic skin colour.
I can't put 50 it's either 49 or 51 May 50 impossible
Thx for reporting, reproduced. Will forward this to the devs.
I can't put 50 it's either 49 or 51 May 50 impossible
Thx for reporting, reproduced. Will forward this to the devs.
The same problem on the Z10 Pro Max
Ok thx. for reporting, will foward.
